Monopol Hard 50 — high-strength cement-based self-levelling floor
High-strength polymer-cement finishing floor and repair compound for concrete floors; compressive strength from 55 MPa, walkable after 6 hours.

Policrete 420 is not a floor coating in itself: it is a thixotropic component compound of polyurethane-cement systems for vertical and sloped surfaces. It is used to form cove skirtings and channels and to protect foundations, plinths, tank bases and wastewater settling tanks. The material has high waterproofing properties and is resistant to temperature changes, water, oils, petrol, solvents, dilute acids and alkalis. Kit 12.6 kg.
| Manufacturer | Monopol — OOO “TEKHBETON” |
|---|---|
| Type | polyurethane-cement floors |
| Use | chemically resistant |
| Base | polyurethane resin with mineral filler, four-component thixotropic |
| Colour | according to the colour chart |
| Packaging | 12.6 kg: component A 0.8 kg + B 0.8 kg + C 11 kg (bag) + pigment paste 150 ml |
| Application method | skirtings (coves), channels, protection of foundations, plinths, tank bases, wastewater settling tanks and other vertical/sloped surfaces; primer 400-600 g/m² |
| Application temperature | substrate temperature at the time of application from +10 °C to +25 °C |
| Key properties | Density 2.2 g/cm³; resistance to temperature changes; high waterproofing properties; chemical resistance to water, dilute and medium-concentration alkalis and acids, oils, petrol, solvents |
| Consumption | for a triangular-section skirting (cove) 50*50 mm — 2.75 kg/linear m |
| Shelf life | 12 months from the date of manufacture (original packaging) |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
High-strength polymer-cement finishing floor and repair compound for concrete floors; compressive strength from 55 MPa, walkable after 6 hours.
Water-based epoxy paint, primer and impregnation in one product for workshops and areas with chemical exposure; can be applied to a damp substrate.
Non-sparking hardening topping for floors of fuel and lubricant stores, warehouses and workshops with fire and explosion hazards; strength from 70 MPa.
Clear membrane-forming curing compound for fresh concrete, toppings and terrazzo floors in workshops, warehouses and car parks; dries in 2 hours.
Topping based on modified quartz for floors with a high regime of abrasion and impact loads; compressive strength from 100 MPa, coloured version available.
Black conductive epoxy primer for the ME 45AS antistatic system with Epoxy 5 AS6/AS7; for chemicals, pharmaceuticals, oil and gas and grain elevators.