Monopol
Monopol Policrete 306 AS — conductive polyurethane-cement floor
Conductive polyurethane-cement floor for chemicals, pharmaceuticals, explosion-hazard production sites and warehouses; resistance below 10⁹ Ω.
Price on request
Monopol
Monopol Epoxy 3W — water-based epoxy paint-primer for damp substrates
The universal water-dispersion compound Epoxy 3W works as a paint, as a primer under self-levelling floors and as a hardening impregnation; it is the primer used under Monopol Epoxy 5W. It contains no solvents, is thinned with water and can be applied to a damp substrate, while its vapour permeability makes waterproofing of the substrate unnecessary. The coating is matt, spark-safe and highly chemically resistant; foot traffic is possible after 12 hours at +20 °C. Besides floors, it is used to protect tanks, channels, pipelines and tunnels.
Specifications
| Manufacturer | Monopol — OOO “TEKHBETON” |
|---|---|
| Type | epoxy floors |
| Use | production workshops, chemically resistant, wet premises |
| Base | water-dispersion epoxy paint-primer; free of organic solvents |
| Colour | grey, light grey, manufacture to the RAL catalogue possible |
| Packaging | 12 kg: component A 10 kg + component B 2 kg (plastic pails) |
| Application method | paint, primer under self-levelling floors and hardening impregnation, thinned with water; can be applied to a damp substrate; second coat 0.15-0.2 kg/m²; primer under Monopol Epoxy 5W |
| Application temperature | substrate and air during application and curing not below +10 °C; substrate no lower than M200, adhesion at least 2.0 MPa |
| Curing | at 20 °C: foot traffic 12 h, light vehicle traffic 72 h, full vehicle load 7 days |
| Key properties | Taber 50 mg; density 1.2 - 1.4 g/cm³; non-volatiles 68%; spark-safe; matt; vapour-permeable (no substrate waterproofing required); pot life at 23 °C at least 30 min (without water), at least 45 min (with water); high chemical resistance |
| Consumption | first coat 0.2 - 0.3 kg/m²; second coat 0.15 - 0.2 kg/m² |
| Shelf life | 12 months from the date of manufacture |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by Monopol
Monopol
Monopol BR 400M — winter repair mortar down to −10 °C
Winter thixotropic R3 repair mortar for concrete, reinforced concrete and industrial floors; work at temperatures from −10 to +35 °C.
Price on request
Monopol
Monopol Hard CS — high-strength polymer-cement floor screed
Polymer-cement screed for levelling and local repair of concrete floors in workshops and public buildings; compressive strength from 35 MPa.
Price on request
Monopol
Monopol Policrete 100 — polyurethane-cement primer for food production
Three-component polyurethane-cement primer for all Policrete systems at food, pharmaceutical and chemical facilities; adhesion above 4.3 MPa.
Price on request
Monopol
Monopol Policrete 150 — polyurethane-cement paint coating
Thin-layer polyurethane-cement coating for food and wet workshops, garages and warehouses; slip resistance R10, class KM1.
Price on request
Monopol
Monopol TOP 100 — quartz dry-shake topping for concrete floors
Quartz hardening mix for concrete floors with light loads in workshops, warehouses, car parks and outdoor areas; strength from 70 MPa.
Price on request