Monopol
Monopol Sealer 2S — odourless water-based wax curing compound
Water-based wax emulsion for curing fresh concrete and toppings indoors: odourless, clear and matt after drying.
Price on request
Monopol
Monopol Policrete 150 — polyurethane-cement paint coating
Policrete 150 is the thin-layer material of the polyurethane-cement range: it is applied as a stand-alone paint coating on floors and walls, as the finishing seal coat of anti-slip systems and as the binder of reinforced multi-layer coatings with quartz sand. The coating is vapour-permeable, does not absorb water, has class KM1 and slip resistance R10; systems based on it withstand temperature changes from −40 to +130 °C. Foot traffic is possible after 12 hours, chemical loads after two days.
Specifications
| Manufacturer | Monopol — OOO “TEKHBETON” |
|---|---|
| Type | polyurethane-cement floors |
| Use | production workshops, wet premises, food and pharmaceutical, car parks and ramps, warehouses and logistics, chemically resistant |
| Base | polyurethane-cement, four-component (paint) |
| Colour | according to the colour chart |
| Packaging | 9.05 kg: component A 2.5 kg + B 2.8 kg + C 3.75 kg + pigment paste 150 ml |
| Application method | stand-alone thin-layer paint coating (horizontal and vertical surfaces), finishing seal coat of the anti-slip systems MP 150R/306R/610R, binder of multi-layer reinforced systems with dry quartz sand |
| Application temperature | substrate temperature at the time of application from +10 °C to +25 °C; substrate moisture no more than 12% |
| Curing | At +20 °C: walking after 12 hours; light vehicle loads after 24 hours; full vehicle loads and chemically aggressive liquids after two days |
| Key properties | Impact strength 11.7 J/cm²; abrasion no more than 0.09 g/cm²; wear resistance AR 0.5; Shore D at least 83; slip resistance R10; water absorption 0%; KM1; vapour permeability yes; density 1.48 g/cm³; adhesion > 5.2 MPa (cohesive failure in concrete); systems withstand temperature changes from -40 °C to +130 °C; chemical resistance to water, dilute and medium-concentration alkalis and acids, oils, petrol, solvents |
| Consumption | 0.2-1.0 kg/m² per coat |
| Shelf life | 12 months from the date of manufacture; store at a temperature not below +5 °C and not above +30 °C |
| Standards | fire hazard class KM1; sanitary-epidemiological expert opinion 'MONOPOL Policrete polymer-mineral floor coatings' |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by Monopol
Monopol
Monopol Hard 50 — high-strength cement-based self-levelling floor
High-strength polymer-cement finishing floor and repair compound for concrete floors; compressive strength from 55 MPa, walkable after 6 hours.
Price on request
Monopol
Monopol BR 400 — thixotropic repair mortar, class R3
Thixotropic R3 repair mortar for concrete, reinforced concrete and brick structures, including industrial floors; F 400, W16.
Price on request
Monopol
Monopol Hard 50S (non-sparking) — high-strength self-levelling floor
Non-sparking high-flow self-levelling floor and non-shrink repair compound for concrete and topping floors; compressive strength from 55 MPa.
Price on request
Monopol
Monopol BR 400M — winter repair mortar down to −10 °C
Winter thixotropic R3 repair mortar for concrete, reinforced concrete and industrial floors; work at temperatures from −10 to +35 °C.
Price on request
Monopol
Monopol Epoxy 5 Base — base epoxy compound for self-levelling systems
Multi-purpose epoxy compound: stand-alone coating, levelling layer under Epoxy 5M or anti-slip system with quartz sand.
Price on request