Monopol Epoxy 5 AS6 — conductive epoxy self-levelling floor
Conductive epoxy floor for premises with explosive gases, dust and liquids, chemical and oil and gas facilities; resistance below 10⁶ Ω.

The water-based wax emulsion Sealer 2S is odourless, so it is convenient to use indoors — in workshops, warehouses, retail buildings and car parks. The product cures freshly laid concrete with topping, thin-layer cement and repair compounds and terrazzo floors. It is white when applied and becomes clear and matt after drying; drying to degree 3 at +23 °C takes up to 3 hours. Substrate and air temperature — from +5 to +30 °C.
| Manufacturer | Monopol — OOO “TEKHBETON” |
|---|---|
| Type | impregnations and concrete hardeners |
| Use | production workshops, warehouses and logistics, car parks and ramps, retail and public |
| Base | wax emulsion in water |
| Colour | white when applied, clear after drying; matt |
| Packaging | plastic canisters 10 litres |
| Application method | curing of freshly laid concrete with topping, thin-layer cement and repair compounds, terrazzo floors |
| Application temperature | substrate and air from +5 °C to +30 °C; relative air humidity no higher than 80% |
| Curing | drying time to degree 3 at 23 °C up to 3 h |
| Key properties | Odourless (water-based wax emulsion); non-volatiles 20%; viscosity VZ-246 10-20 s; density 1 g/cm³ |
| Consumption | 0.1-0.15 l per 1 m² |
| Shelf life | 1 year from the date of manufacture in an unopened sealed container |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Conductive epoxy floor for premises with explosive gases, dust and liquids, chemical and oil and gas facilities; resistance below 10⁶ Ω.
Rigid-elastic polyurethane self-levelling floor for production sites, medicine, schools, laboratories and car parks; elongation at break from 70%.
High-strength polymer-cement finishing floor and repair compound for concrete floors; compressive strength from 55 MPa, walkable after 6 hours.
Conductive polyurethane-cement floor for chemicals, pharmaceuticals, explosion-hazard production sites and warehouses; resistance below 10⁹ Ω.
Pourable high-strength screed-topping for car parks, ramps and renovation of old concrete floors; flexural strength from 10 MPa.
Matt water-based polyurethane varnish for epoxy, polyurethane and PU-cement floors; does not yellow under UV, dries in 60 minutes.