Monopol Epoxy 5 AS6 — conductive epoxy self-levelling floor
Conductive epoxy floor for premises with explosive gases, dust and liquids, chemical and oil and gas facilities; resistance below 10⁶ Ω.

Monopol TOP WD is not a dry mix for working in but a pourable topping: the powder is mixed with water and laid as a high-strength layer on new and old concrete substrates, including sloped ones. It is chosen for car parks and ramps with intensive use, for floor renovation and for bringing the substrate to the design level. Flexural strength at least 10 MPa, abrasion 0.11 g/cm², foot traffic after 24 hours, light load after 7 days.
| Manufacturer | Monopol — OOO “TEKHBETON” |
|---|---|
| Type | toppings |
| Use | car parks and ramps, production workshops, warehouses and logistics, outdoor areas |
| Base | modified mix on a mineral filler (grey dry powder) |
| Colour | natural |
| Packaging | multi-wall paper bag 25 kg, 40 bags per pallet |
| Application method | mixed with water (quantity per the white label on the bag), pourable high-strength layer/screed on new and old concrete substrates, horizontal and sloped surfaces; curing — Monopol Sealer 2/2S/2T/2E 0.1 l/m²; pot life 20-30 minutes at +20 °C |
| Application temperature | application temperature from +10 to +30 °C |
| Curing | foot traffic after 24 h; light load (no more than 20 MPa) after 7 days; strength gain time 28 days |
| Key properties | Compressive strength: in the method statement 'after 1 day min. 60 MPa; after 28 days min. 30 MPa'; flexural strength at 28 days min. 10 MPa; abrasion LKI-3M 0.11 g/cm²; impact (GOST 30353) at least 20 kg from a height of 1 metre; max. particles 3.0 mm; bulk density 1800 kg/m³ |
| Layer thickness | 10 – 30 mm |
| Shelf life | 12 months from the date of manufacture |
| Standards | methods: GOST 30353, SP 28.13330.2012 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Conductive epoxy floor for premises with explosive gases, dust and liquids, chemical and oil and gas facilities; resistance below 10⁶ Ω.
Matt water-based polyurethane varnish for epoxy, polyurethane and PU-cement floors; does not yellow under UV, dries in 60 minutes.
Budget gloss grey epoxy paint for concrete and metal floors in workshops, warehouses and car parks; Taber abrasion 40 mg.
Clear solvent-free epoxy varnish for protecting and restoring concrete, terrazzo and topping floors; full load after 72 hours.
Non-sparking polymer-cement self-levelling floor for explosion and fire hazard workshops, warehouses and car parks with medium and high loads; from 40 MPa.
Clear solvent-free epoxy primer for self-levelling polymer floors; with quartz sand it is used to repair cracks and spalls in concrete.