Monopol Epoxy 3 AS — conductive epoxy floor paint
Conductive gloss epoxy paint for rooms with CNC equipment, laboratories, pharmaceuticals and clean areas; resistance 10⁴–10⁶ Ω.

The manufacturer positions Epoxy 3M as a budget epoxy floor paint. It is applied in two or more coats to concrete, terrazzo, polymer, polymer-cement and metal substrates, horizontally and vertically. The coating is gloss, grey and non-sparking; compressive strength after 7 days is 70 MPa, Taber abrasion 40 mg, and full loads are allowed after 72 hours. Suitable for workshops, warehouses, car parks and retail premises.
| Manufacturer | Monopol — OOO “TEKHBETON” |
|---|---|
| Type | epoxy floors |
| Use | production workshops, warehouses and logistics, car parks and ramps, retail and public |
| Base | epoxy resin, polyamine hardener, blend of organic solvents, pigments, fillers |
| Colour | grey |
| Packaging | 30 kg (A 27.2 kg + B 2.8 kg); 12 kg (A 10.9 kg + B 1.1 kg) |
| Application method | thin-layer paint in 2 or more coats, horizontal and vertical; concrete, terrazzo, polymer, polymer-cement and metal substrates |
| Application temperature | substrate and air during application and curing not below +10 °C; substrate moisture no more than 4% by weight |
| Curing | full loads after 72 hours; drying to degree 3 at 23 °C no more than 6 h |
| Key properties | Compressive strength at 7 days 70 MPa; flexural strength at 7 days 15 MPa; Taber 40 mg; density 1.55 g/cm³; non-volatiles at least 83%; non-sparking; gloss |
| Consumption | 2.19 g/m² per 1 µm; mineral substrate: second and each subsequent coat no more than 175 g/m² (100 µm) |
| Shelf life | 12 months from the date of manufacture |
| Standards | certificate ROSS.RU.AZh49.N04910 (MONOPOL polymer floor coatings) |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Conductive gloss epoxy paint for rooms with CNC equipment, laboratories, pharmaceuticals and clean areas; resistance 10⁴–10⁶ Ω.
Non-sparking polymer-cement self-levelling floor for explosion and fire hazard workshops, warehouses and car parks with medium and high loads; from 40 MPa.
Topping based on modified quartz for floors with a high regime of abrasion and impact loads; compressive strength from 100 MPa, coloured version available.
Water-based epoxy paint, primer and impregnation in one product for workshops and areas with chemical exposure; can be applied to a damp substrate.
Conductive polyurethane-cement floor for chemicals, pharmaceuticals, explosion-hazard production sites and warehouses; resistance below 10⁹ Ω.
Vapour-permeable water-based epoxy floor for fresh concrete, food workshops and premises with wet operation; walkable after 12 hours.