Monopol TOP 200 — corundum dry-shake topping for concrete floors
Corundum mix for hardening concrete floors with medium loads in workshops, warehouses and car parks; a coloured version is available.

The winter version of the repair mortar, BR 400M, makes it possible to restore concrete, reinforced concrete and brick structures, including industrial floors and outdoor areas, at temperatures down to −10 °C. After placing, the surface is protected from drying out for 1–2 days. Repair mortar class R3, compressive strength at least 40 MPa, flexural strength at least 6 MPa, adhesion at least 1.5 MPa, frost resistance F 400 and water impermeability W16.
| Manufacturer | Monopol — OOO “TEKHBETON” |
|---|---|
| Type | concrete floor repair |
| Use | production workshops, outdoor areas |
| Base | dry thixotropic repair mix based on Portland cement with quartz sand and modifying additives (winter) |
| Colour | natural |
| Packaging | 25 kg bag |
| Application method | repair of concrete, reinforced concrete and brick structures (industrial floors are on the list) at sub-zero temperatures; curing — protection from drying out for 1-2 days |
| Application temperature | from -10 to +35 °C |
| Key properties | Class R3; compressive strength at least 40 MPa; flexural strength at least 6 MPa; adhesion at 28 days at least 1.5 MPa; F 400; W16; aggregate no more than 0.63 mm; work down to -10 °C |
| Layer thickness | from 5 to 50 mm per pass |
| Consumption | 2 kg per 1 m² at a layer thickness of 1 mm |
| Shelf life | 12 months in the manufacturer's packaging |
| Standards | repair mortar class R3; reference to SP 70.13330.2012; storage per GOST 31357-2007 cl. 8 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Corundum mix for hardening concrete floors with medium loads in workshops, warehouses and car parks; a coloured version is available.
Self-levelling polymer-cement finishing floor and non-shrink repair material for concrete and topping floors; from 40 MPa.
Non-sparking hardening topping for floors of fuel and lubricant stores, warehouses and workshops with fire and explosion hazards; strength from 70 MPa.
Gloss epoxy self-levelling floor for workshops, warehouses, car parks and sales floors, resistant to abrasion, impact and chemicals; Shore D hardness 80.
Black conductive epoxy primer for the ME 45AS antistatic system with Epoxy 5 AS6/AS7; for chemicals, pharmaceuticals, oil and gas and grain elevators.
Thixotropic polyurethane-cement compound for coves, channels, plinths and tanks in Policrete systems; high waterproofing properties.