Monopol
Monopol TOP 600 — quartz-corundum dry-shake topping with minimum abrasion
Topping with quartz and synthetic corundum aggregate for intensive loads; abrasion 0.07 g/cm², the lowest in the TOP series.
Price on request
Monopol
Monopol Epoxy 5 — chemically resistant epoxy self-levelling floor
Epoxy 5 is the gloss finishing layer of a self-levelling epoxy floor, poured over Monopol Epoxy 4, 4M or 4S primer on concrete and metal substrates. The coating resists abrasion, impact and chemical exposure; the resistance list is given in a separate manufacturer’s appendix. Compressive strength after 7 days at least 70 MPa, Shore D hardness 80, Taber abrasion 45 mg, and the coating is spark-safe. At +20 °C foot traffic is possible after 24 hours, full vehicle load after 120 hours.
Specifications
| Manufacturer | Monopol — OOO “TEKHBETON” |
|---|---|
| Type | epoxy floors |
| Use | production workshops, warehouses and logistics, car parks and ramps, retail and public, chemically resistant |
| Base | epoxy resin and polyamine hardener; quartz filler, pigments |
| Colour | grey, light grey, manufacture to the RAL catalogue possible |
| Packaging | 30 kg kit: component A 25.6 kg + component B 4.4 kg |
| Application method | poured over Monopol Epoxy 4 / 4M / 4S primer, spread with a gauge rake, rolled with a spiked roller; concrete and metal substrates; use the material within 30 minutes |
| Application temperature | substrate and air during application and curing not below +10 °C; substrate at least 3 °C above the dew point; substrate moisture no more than 4% by weight |
| Curing | At +20 °C: foot traffic 24 h, light vehicle traffic 72 h, full vehicle load 120 h; drying time to degree 3 at 23 °C no more than 6 h; cleaning with alkaline agents not earlier than 72 h |
| Key properties | Compressive strength at 7 days min. 70 MPa; flexural strength at 7 days min. 30 MPa; Taber abrasion 45 mg; Shore D hardness 80; relative elongation 5-7%; density 1.57 g/cm³; non-volatiles ≈100%; spark-safe; pot life at 23 °C at least 30 min; chemical resistance — per Appendix No. 1 |
| Layer thickness | recommended system: finishing coat 2 mm |
| Consumption | 1.57 kg per 1 mm of thickness per 1 m² |
| Shelf life | 12 months from the date of manufacture; store at a temperature not above +30 °C |
| Standards | certificate ROSS.RU.AZh49.N04910 and fire safety certificate RU.32528.04BST0.OS03.00398 (MONOPOL polymer floor coatings); SGR RU.01.PA.02.015.E.001578.11.21 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by Monopol
Monopol
Monopol Epoxy 3 — epoxy paint for concrete floors
Gloss epoxy enamel for dustproofing and protecting concrete floors in workshops, warehouses and car parks; full loads after 72 hours.
Price on request
Monopol
Monopol PU 15 — rigid-elastic polyurethane self-levelling floor
Rigid-elastic polyurethane self-levelling floor for production sites, medicine, schools, laboratories and car parks; elongation at break from 70%.
Price on request
Monopol
Monopol BR 500 — repair mortar for car park entrances
Thixotropic R3 repair mortar for concrete structures and car park entrance surfaces; compressive strength from 25 MPa after one day.
Price on request
Monopol
Monopol Policrete 306 — polyurethane-cement floor for food production
Self-levelling polyurethane-cement floor for the food industry, pharmaceuticals, warehouses and car parks with dry and wet conditions; class KM1.
Price on request
Monopol
Monopol 20M — water-repellent hardening impregnation for concrete
Hardening dustproofing impregnation with a water-repellent effect for concrete floors and screeds indoors and outdoors; applied to concrete aged 14 days or more.
Price on request