Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
Monopol Policrete 306 — polyurethane-cement floor for food production
Monopol

Monopol Policrete 306 — polyurethane-cement floor for food production

Polyurethane-cement floors

The self-levelling Policrete 306 is intended for the food and processing industry, pharmaceuticals, warehouses, car parks and agricultural complexes. It works in dry and wet conditions under light and moderate loads — pedestrians, pneumatic-tyred vehicles and trolleys with polymer wheels. Compressive strength at least 58 MPa, Shore D hardness from 81, slip resistance R10, class KM1, water absorption 0%. Anchor grooves must be cut along all abutments.

Specifications

ManufacturerMonopol — OOO “TEKHBETON”
Typepolyurethane-cement floors
Usecar parks and ramps, food and pharmaceutical, warehouses and logistics, wet premises, chemically resistant
Basepolyurethane resin with mineral filler and pigment paste, four-component self-levelling
Colouraccording to the colour chart
Packaging20.3 kg: component A 2.5 kg + B 2.8 kg + C 15 kg + pigment paste 150 ml
Application methodself-levelling layer 3.0-6.0 mm (recommended average 4.0 mm) over Monopol Policrete 100 primer; anchor grooves at abutments are mandatory
Application temperaturesubstrate temperature at the time of application from +10 °C to +25 °C; recommended air humidity from 35% to 75%; substrate moisture no more than 12%; substrate 3 °C above the dew point
CuringAt +20 °C: walking after 12 hours; light vehicle loads after 24 hours; full vehicle loads and chemically aggressive liquids after two days
Key propertiesCompressive strength at least 58 MPa; flexural strength at least 18 MPa; impact strength 5.3 J/cm²; abrasion no more than 0.19 g/cm²; AR 0.5; Shore D at least 81; R10; water absorption 0%; KM1; vapour permeability yes; density 1.94 g/cm³; adhesion > 4.5 MPa (cohesive failure in concrete); chemical resistance to water, dilute and medium-concentration alkalis and acids, oils, petrol, solvents
Layer thicknessfrom 3.0 to 6.0 mm (recommended average layer 4.0 mm)
Consumptionfrom 7.0 kg/m²
Shelf life12 months from the date of manufacture; store at a temperature not below +5 °C and not above +30 °C
Standardsfire hazard class KM1; references to SP 29.13330.2011, SNiP 2.03.13-88 Floors

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by Monopol