Monopol BR 400 — thixotropic repair mortar, class R3
Thixotropic R3 repair mortar for concrete, reinforced concrete and brick structures, including industrial floors; F 400, W16.

The professional impregnation Monopol 20M makes concrete stronger and water-repellent and stops surface dusting — the effect appears on day 7–14, and the full set of properties develops over 2–3 months. It can be used on concrete floors, cement-sand screeds including semi-dry ones, as well as foundations and walls, indoors and outdoors. The concrete must be at least 14 days old, and the substrate temperature from +4 to +35 °C. Packaging — 10 l canister.
| Manufacturer | Monopol — OOO “TEKHBETON” |
|---|---|
| Type | impregnations and concrete hardeners |
| Use | production workshops, warehouses and logistics, car parks and ramps, retail and public, outdoor areas |
| Base | hardening and dustproofing water-repellent impregnation (the chemical base is not named in the method statement) |
| Packaging | 10 l plastic canister |
| Application method | concrete floors, cement-sand (incl. semi-dry) screeds, foundations, walls — concrete aged 14 days or more; interior and exterior work; if slippery after 15 min, wet with water and work with a brush |
| Application temperature | substrate temperature not below +4 °C and not above +35 °C |
| Curing | on day 7-14 the concrete becomes stronger, repels water and stops dusting; full set of properties — 2-3 months; cleaning with alkaline agents not earlier than 14 days |
| Key properties | Water-repellent (hydrophobic) surface, increased hardness and wear resistance |
| Consumption | 0.2 – 0.35 l/m² (depends on concrete porosity) |
| Shelf life | 1 year from the date of manufacture in a sealed container |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Thixotropic R3 repair mortar for concrete, reinforced concrete and brick structures, including industrial floors; F 400, W16.
Non-sparking hardening topping for floors of fuel and lubricant stores, warehouses and workshops with fire and explosion hazards; strength from 70 MPa.
Three-component polyurethane-cement primer for all Policrete systems at food, pharmaceutical and chemical facilities; adhesion above 4.3 MPa.
Antistatic epoxy floor for premises with high-precision equipment, pharmaceuticals and laboratories; resistance 10⁶–10⁹ Ω.
Coarse quartz-corundum mix for concrete floors with very high loads in workshops, warehouses and car parks; from 80 MPa.
Deep-penetrating acrylic primer for absorbent substrates under Monopol Hard self-levelling floors; dries in up to 4 hours, keeps for 2 years.