Monopol BR 500 — repair mortar for car park entrances
Thixotropic R3 repair mortar for concrete structures and car park entrance surfaces; compressive strength from 25 MPa after one day.

Primer 17 is a water-based acrylic dispersion that penetrates any absorbent substrate, strengthens it, reduces absorbency and improves bonding with the next layer. In Monopol systems it goes under Hard polymer-cement self-levelling floors. The primer is suitable for interior and exterior work, horizontal and vertical surfaces; substrate temperature — from +5 to +35 °C, drying — up to 4 hours. Shelf life in the factory container — 2 years.
| Manufacturer | Monopol — OOO “TEKHBETON” |
|---|---|
| Type | floor primers |
| Base | water-based acrylic dispersion |
| Application method | deep-penetrating primer for all absorbent substrates, interior and exterior work, horizontal and vertical; strengthens the substrate, reduces absorbency, increases adhesion; under Monopol Hard self-levelling floors |
| Application temperature | substrate not below +5 °C and not above +35 °C; relative air humidity no higher than 80% |
| Curing | drying time up to 4 hours |
| Key properties | Density at +23 °C 1 g/cm³; reduces the consumption of subsequent materials |
| Consumption | 0.1–0.2 l/m² for a single application |
| Shelf life | 2 years from the date of manufacture in an unopened sealed container |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Thixotropic R3 repair mortar for concrete structures and car park entrance surfaces; compressive strength from 25 MPa after one day.
Topping based on modified quartz for floors with a high regime of abrasion and impact loads; compressive strength from 100 MPa, coloured version available.
Clear solvent-free epoxy resin for 3D floors and a protective, armouring layer in decorative coatings; odourless during application.
Pourable high-strength screed-topping for car parks, ramps and renovation of old concrete floors; flexural strength from 10 MPa.
Polymer-cement self-leveller for levelling concrete under industrial, commercial and sports floor coverings; polymer floor after 3 days.
Pourable R4 repair mortar with fibre for restoring concrete and topping floors in workshops, warehouses, car parks and sales floors; from 60 MPa.