Monopol Policrete 150 — polyurethane-cement paint coating
Thin-layer polyurethane-cement coating for food and wet workshops, garages and warehouses; slip resistance R10, class KM1.

The basic pourable compound of the Hard range levels a concrete substrate before laying any industrial, commercial and sports coverings. The mix based on cement with graded aggregate and polymer additives flows by itself; it can be walked on after 12 hours, and a polymer coating is laid after 3 days. Compressive strength at 28 days at least 30 MPa, flexural strength at least 10 MPa, adhesion to concrete from 2 MPa. For interior work only; the substrate must be concrete no lower than M200.
| Manufacturer | Monopol — OOO “TEKHBETON” |
|---|---|
| Type | floor material |
| Use | production workshops, retail and public |
| Base | self-levelling cement-based dry mix with graded aggregate and polymer additives |
| Colour | natural (grey powder) |
| Packaging | multi-wall paper bag 20 kg |
| Application method | levelling pourable layer on concrete under any industrial, commercial and sports floor coverings; indoors only; polymer coatings — after 3 days; substrate no lower than M200, concrete age 28 days |
| Application temperature | application temperature from +10 to +30 °C |
| Curing | foot traffic after 12 h |
| Key properties | Compressive strength at 28 days at least 30 MPa; flexural strength at 28 days at least 10 MPa; adhesion to concrete at 28 days at least 2 MPa; flowability Rk5 22 - 26 cm; mortar working life at least 20 min |
| Layer thickness | 5 - 50 mm |
| Consumption | 1.8 kg/m² per 1 mm of thickness |
| Shelf life | 12 months from the date of manufacture in a dry place |
| Standards | flowability per GOST 31356; certificate ROSS RU.NV78.N03646 (Monopol HARD dry polymer-cement mixes) |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Thin-layer polyurethane-cement coating for food and wet workshops, garages and warehouses; slip resistance R10, class KM1.
Conductive water-based epoxy primer for Policrete 306 AS antistatic floors in cleanrooms, pharmaceuticals and chemicals; below 10⁶ Ω.
Polymer-cement screed for levelling and local repair of concrete floors in workshops and public buildings; compressive strength from 35 MPa.
Matt water-based polyurethane varnish for epoxy, polyurethane and PU-cement floors; does not yellow under UV, dries in 60 minutes.
Polymer membrane-forming curing compound for fresh concrete, toppings and repair compounds; applied no later than 24 hours after placing.
Non-shrink rapid-hardening R4 mortar with fibre for repairing industrial floors in warehouses, workshops and car parks; from 30 MPa after one day.