The clear high-build compound Epoxy 5T is used where appearance matters: for 3D floors, concrete protection and as an armouring layer in decorative systems. It contains no solvents and is odourless during application. Compressive strength after 7 days is 45 MPa, flexural strength 15 MPa, Taber abrasion 65 mg, and the coating is non-sparking. It is applied to a prepared substrate at temperatures not below +10 °C.
| Manufacturer | Monopol — OOO “TEKHBETON” |
|---|---|
| Type | epoxy floors |
| Use | decorative |
| Base | clear epoxy resin, functional additives, hardener; free of organic solvents |
| Colour | clear |
| Packaging | 20 kg kit: component A 13.6 kg + component B 6.4 kg (metal pails) |
| Application method | high-build pour on a prepared substrate; 3D floors; concrete protection; armouring layer in systems |
| Application temperature | substrate and air during application and curing not below +10 °C; substrate at least 3 °C above the dew point; substrate moisture no more than 4% by weight; substrate pull-off strength at least 2.0 MPa |
| Curing | drying time to degree 3 at 23 °C no more than 6 h; cleaning not earlier than 72 h |
| Key properties | Compressive strength at 7 days 45 MPa; flexural strength at 7 days 15 MPa; Taber abrasion 65 mg; density 1.1 g/cm³; non-volatiles ≈100%; non-sparking; pot life at 23 °C at least 30 min; odourless during application |
| Shelf life | 12 months from the date of manufacture; store at a temperature not above +30 °C |
| Standards | MONOPOL polymer floor coating certificates (ROSS.RU.AZh49.N04910 and others) |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Non-sparking polymer-cement self-levelling floor for explosion and fire hazard workshops, warehouses and car parks with medium and high loads; from 40 MPa.
Self-levelling polymer-cement finishing floor and non-shrink repair material for concrete and topping floors; from 40 MPa.
Lightfast membrane-forming curing compound for fresh concrete and toppings on outdoor areas and the sunny side; 20 l pail.
Vapour-permeable water-based epoxy floor for fresh concrete, food workshops and premises with wet operation; walkable after 12 hours.
Antistatic epoxy floor for premises with high-precision equipment, pharmaceuticals and laboratories; resistance 10⁶–10⁹ Ω.
Deep-penetrating acrylic primer for absorbent substrates under Monopol Hard self-levelling floors; dries in up to 4 hours, keeps for 2 years.
