Monopol Sealer 2S — odourless water-based wax curing compound
Water-based wax emulsion for curing fresh concrete and toppings indoors: odourless, clear and matt after drying.

Policrete 420 is not a floor coating in itself: it is a thixotropic component compound of polyurethane-cement systems for vertical and sloped surfaces. It is used to form cove skirtings and channels and to protect foundations, plinths, tank bases and wastewater settling tanks. The material has high waterproofing properties and is resistant to temperature changes, water, oils, petrol, solvents, dilute acids and alkalis. Kit 12.6 kg.
| Manufacturer | Monopol — OOO “TEKHBETON” |
|---|---|
| Type | polyurethane-cement floors |
| Use | chemically resistant |
| Base | polyurethane resin with mineral filler, four-component thixotropic |
| Colour | according to the colour chart |
| Packaging | 12.6 kg: component A 0.8 kg + B 0.8 kg + C 11 kg (bag) + pigment paste 150 ml |
| Application method | skirtings (coves), channels, protection of foundations, plinths, tank bases, wastewater settling tanks and other vertical/sloped surfaces; primer 400-600 g/m² |
| Application temperature | substrate temperature at the time of application from +10 °C to +25 °C |
| Key properties | Density 2.2 g/cm³; resistance to temperature changes; high waterproofing properties; chemical resistance to water, dilute and medium-concentration alkalis and acids, oils, petrol, solvents |
| Consumption | for a triangular-section skirting (cove) 50*50 mm — 2.75 kg/linear m |
| Shelf life | 12 months from the date of manufacture (original packaging) |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Water-based wax emulsion for curing fresh concrete and toppings indoors: odourless, clear and matt after drying.
Clear membrane-forming curing compound for fresh concrete, toppings and terrazzo floors in workshops, warehouses and car parks; dries in 2 hours.
Black conductive epoxy primer for the ME 45AS antistatic system with Epoxy 5 AS6/AS7; for chemicals, pharmaceuticals, oil and gas and grain elevators.
Epoxy self-levelling floor filled with quartz sand for workshops, warehouses, car parks and retail buildings; fire hazard class KM1.
Self-levelling polymer-cement finishing floor and non-shrink repair material for concrete and topping floors; from 40 MPa.
Thin-layer polyurethane-cement coating for food and wet workshops, garages and warehouses; slip resistance R10, class KM1.