Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
Monopol Epoxy 5M — filled epoxy floor, class KM1
Monopol

Monopol Epoxy 5M — filled epoxy floor, class KM1

Epoxy floors

The Epoxy 5M modification is intended for filling with quartz sand on site; without sand the compound is used only as a decorative finishing layer. Fire safety — class KM1, and the coating is non-sparking. Compressive strength after 7 days at least 70 MPa, flexural strength at least 30 MPa, Shore D hardness 80, Taber abrasion 45 mg. It is poured over Monopol Epoxy 4, 4M or 4S primers; full vehicle load at +20 °C is allowed after 120 hours.

Specifications

ManufacturerMonopol — OOO “TEKHBETON”
Typeepoxy floors
Useproduction workshops, warehouses and logistics, car parks and ramps, retail and public, chemically resistant
Baseepoxy resin and polyamine hardener; quartz filler, pigments; used with quartz sand 0.1-0.4
Colourgrey, light grey, manufacture to the RAL catalogue possible
Packaging25 kg kit: component A 20 kg + component B 5 kg
Application methodpoured over Monopol Epoxy 4 / 4M / 4S primer with filling with quartz sand 0.1-0.4 mm; without sand — only as a decorative finishing layer no more than 1.5 mm thick (1.36 kg/m² per 1 mm)
Application temperaturesubstrate and air during application and curing not below +10 °C; substrate at least 3 °C above the dew point; substrate moisture no more than 4% by weight
CuringAt +20 °C: foot traffic 24 h, light vehicle traffic 72 h, full vehicle load 120 h; pot life: +10 °C at least 45 min, +23 °C at least 30 min, +30 °C at least 15 min
Key propertiesCompressive strength at 7 days min. 70 MPa; flexural strength at 7 days min. 30 MPa; Taber 45 mg; Shore D 80; elongation 5-7%; density 1.36 g/cm³ (with quartz sand 1.75); non-sparking; fire safety KM1
Layer thicknesswithout sand — no more than 1.5 mm (decorative finish)
Consumptionin the method statement: without sand 1.36 kg/m² per 1 mm of layer
Shelf life12 months from the date of manufacture; store at a temperature not above +30 °C
Standardsfire safety rating KM1; MONOPOL polymer floor coating certificates (ROSS.RU.AZh49.N04910, RU.32528.04BST0.OS03.00398)

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by Monopol