Hard 50S is the non-sparking version of the high-strength Hard 50, a high-flow mix. It is used as a finishing coat when levelling floors and as a non-shrink repair material for concrete, topping and other cement substrates, indoors only. The coating is suitable for any loads except heavy chemical ones. Compressive strength at 28 days at least 55 MPa, flexural strength at least 16 MPa, adhesion to concrete from 3 MPa; foot traffic after 6 hours.
| Manufacturer | Monopol — OOO “TEKHBETON” |
|---|---|
| Type | concrete floor repair |
| Base | self-levelling cement-based dry mix with polymer additives, non-sparking, high-flow |
| Colour | natural |
| Packaging | 20 kg bag |
| Application method | finishing coat when levelling floors and non-shrink repair material for concrete, topping and other cement floors; indoors only |
| Application temperature | application temperature from +10 to +30 °C |
| Curing | foot traffic after 6 h |
| Key properties | Non-sparking; compressive strength at 28 days at least 55 MPa; flexural strength at least 16 MPa; adhesion to concrete at least 3 MPa; flowability Rk5 22 - 26 cm; mortar working life at least 20 min |
| Layer thickness | 5-50 mm |
| Consumption | 1.8 kg/m² per 1 mm of thickness |
| Shelf life | 12 months in a dry place |
| Standards | flowability per GOST 31356 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Non-sparking polymer-cement self-levelling floor for explosion and fire hazard workshops, warehouses and car parks with medium and high loads; from 40 MPa.
High-strength polymer-cement finishing floor and repair compound for concrete floors; compressive strength from 55 MPa, walkable after 6 hours.
Deep-penetrating acrylic primer for absorbent substrates under Monopol Hard self-levelling floors; dries in up to 4 hours, keeps for 2 years.
Multi-purpose epoxy compound: stand-alone coating, levelling layer under Epoxy 5M or anti-slip system with quartz sand.
Conductive polyurethane-cement floor for chemicals, pharmaceuticals, explosion-hazard production sites and warehouses; resistance below 10⁹ Ω.
Lightfast membrane-forming curing compound for fresh concrete and toppings on outdoor areas and the sunny side; 20 l pail.
