Monopol TOP 100 — quartz dry-shake topping for concrete floors
Quartz hardening mix for concrete floors with light loads in workshops, warehouses, car parks and outdoor areas; strength from 70 MPa.

Epoxy 5 Base is a universal base for high-build filled and anti-slip epoxy systems. The compound works as a stand-alone coating, as a levelling underlayer beneath Monopol Epoxy 5M and as a rough non-slip coating with quartz sand. Shore D hardness 80–85, compressive strength after 7 days at least 70 MPa, Taber abrasion 46 mg, non-sparking. Colours — natural, grey and dark grey.
| Manufacturer | Monopol — OOO “TEKHBETON” |
|---|---|
| Type | epoxy floors |
| Use | production workshops, warehouses and logistics, car parks and ramps, retail and public |
| Base | epoxy resin and polyamine hardener (base levelling compound) |
| Colour | natural, grey, dark grey |
| Packaging | 30 kg kit: component A 26.3 kg + component B 3.7 kg |
| Application method | stand-alone coating (ME 45), levelling underlayer beneath Epoxy 5M (ME 455BM), rough non-slip coating with quartz sand (ME 455R); over Monopol Epoxy 4 / 4M / 4S primer; poured with a gauge rake and spiked roller; use within 20 minutes |
| Application temperature | substrate and air during application and curing not below +10 °C; substrate at least 3 °C above the dew point; substrate moisture no more than 4% by weight |
| Curing | At +20 °C: foot traffic 24 h, light vehicle traffic 72 h, full vehicle load 120 h; pot life at 23 °C at least 20 min |
| Key properties | Compressive strength at 7 days at least 70 MPa; flexural strength at 7 days at least 30 MPa; Taber 46 mg; Shore D 80-85; elongation 5-7%; density 1.55 g/cm³; non-volatiles ≈100%; non-sparking |
| Layer thickness | levelling layer (ME 455BM) 1-4 mm; rough coating ME 455R 2.5-3.0 mm |
| Consumption | 1.55 kg per 1 mm of thickness per 1 m² (stand-alone coating ME 45); in the rough system ME 455R — 0.7-0.9 kg/m² + quartz sand 0.4-0.8 mm 3.0-4.0 kg/m² |
| Shelf life | 12 months from the date of manufacture |
| Standards | MONOPOL polymer floor coating certificates |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Quartz hardening mix for concrete floors with light loads in workshops, warehouses, car parks and outdoor areas; strength from 70 MPa.
Topping based on modified quartz for floors with a high regime of abrasion and impact loads; compressive strength from 100 MPa, coloured version available.
Water-based wax emulsion for curing fresh concrete and toppings indoors: odourless, clear and matt after drying.
Self-levelling polyurethane-cement floor for the food industry, pharmaceuticals, warehouses and car parks with dry and wet conditions; class KM1.
Gloss epoxy enamel for dustproofing and protecting concrete floors in workshops, warehouses and car parks; full loads after 72 hours.
Vapour-permeable water-based epoxy floor for fresh concrete, food workshops and premises with wet operation; walkable after 12 hours.