Monopol Hard 30 — self-levelling compound for floor coverings
Polymer-cement self-leveller for levelling concrete under industrial, commercial and sports floor coverings; polymer floor after 3 days.

Monopol TOP 100 is the basic quartz topping of the range, designed for a light regime of abrasion and impact loads. The mix is applied to freshly laid concrete in two passes and floated with a power trowel, after which the surface is sealed with Monopol Sealer. At 28 days the compressive strength is at least 70 MPa, flexural strength at least 7 MPa, abrasion 0.14 g/cm², combustibility category NG (non-combustible). It is suitable for floors indoors and outdoors, but not for contact with acids, alkalis and salts.
| Manufacturer | Monopol — OOO “TEKHBETON” |
|---|---|
| Type | toppings |
| Use | production workshops, warehouses and logistics, car parks and ramps, retail and public, outdoor areas |
| Base | quartz aggregate (quartz topping) |
| Colour | natural |
| Packaging | multi-wall paper bag 25 kg, 40 bags per pallet |
| Application method | dry application onto freshly laid concrete in 2 stages (60-65% + 35-40% of the consumption), floating with a power trowel with a disc, finishing with blades; curing — Monopol Sealer 2/2S/2T/2E 0.1 l/m² |
| Application temperature | substrate and air not below +5 °C; above +25 °C and/or at humidity below 60% the surface loses water quickly; application temperature from +5 to +25 °C |
| Curing | At substrate temperature +10/+20/+30 °C: foot traffic ≈20/≈15/≈10 h, putting into service ≈10/≈7/≈5 days, full strength gain 28 days (method statement table); in the specifications table: foot traffic after 24 h, light load (no more than 20 MPa) after 7 days |
| Key properties | Compressive strength at 28 days min. 70 MPa; flexural tensile strength at 28 days min. 7 MPa; abrasion LKI-3M 0.14 g/cm²; impact (GOST 30353) at least 15 kg from a height of 1 metre; shrinkage max. 0.1%; max. particles 3.5 mm; bulk density 1840 kg/m³; service environment non-aggressive and slightly aggressive (SP 28.13330.2012); combustibility category NG |
| Layer thickness | ≈ 2 – 5 mm |
| Shelf life | 12 months from the date of manufacture (closed original packaging on pallets) |
| Standards | certificate of conformity ROSS RU.NV78.N03645 (Monopol TOP dry mixes); methods: GOST 30353, SP 28.13330.2012 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Polymer-cement self-leveller for levelling concrete under industrial, commercial and sports floor coverings; polymer floor after 3 days.
High-build polyurethane-cement floor for food and chemical production, cold stores and freezer rooms; compressive strength from 57 MPa.
Antistatic epoxy floor for premises with high-precision equipment, pharmaceuticals and laboratories; resistance 10⁶–10⁹ Ω.
Cement bonding layer before repair compounds and screeds on concrete, reinforced concrete and metal; adhesion to concrete from 3 MPa.
Topping with quartz and synthetic corundum aggregate for intensive loads; abrasion 0.07 g/cm², the lowest in the TOP series.
Budget gloss grey epoxy paint for concrete and metal floors in workshops, warehouses and car parks; Taber abrasion 40 mg.