ALFAPOL EP-3V — matt water-based epoxy floor paint
Vapour-permeable water-based epoxy paint with a matt finish for workshops and outdoor areas, tinting to RAL.

A three-component polyurethane-cement system for floors that need spark safety, static dissipation and heat resistance at the same time. Shore D hardness is at least 80, compressive strength 40 MPa, flexural strength 12 MPa, electrical resistance below 10⁶ Ω. The coating suits food and pharmaceutical workshops, wet areas and outdoor sites and withstands service temperatures up to +130 °C depending on the version; full load is allowed after 7 days.
| Manufacturer | ALFAPOL — OOO “ALFAPOL”, Saint Petersburg |
|---|---|
| Type | polyurethane-cement floors |
| Use | production halls, warehouses and logistics, food and pharmaceutical, chemically resistant, antistatic/conductive, wet areas, outdoor areas |
| Base | polyurethane-cement; Polyurethane-cement antistatic non-sparking floor, heat-resistant coating |
| Colour | tinting to RAL with restrictions |
| Packaging | Plastic containers: Component A 3.5 kg, Component B 3.0 kg. Polypropylene bag: Component C 25 kg. |
| Application temperature | Application temperature, °C: +10°C to +30°C |
| Curing | At 20 °C: foot traffic after 3 days, medium load after 5 days, full load after 7 days; Recoat interval, h, min.: 24; Foot traffic, h, min.: 72; Full cure, days, min.: 7 |
| Key properties | Service temperature, °C: 6 mm layer from -25 to +80, 9 mm layer from -40 to +120, 12 mm layer from -40 to +130; Shore D hardness, min.: 80; Compressive strength, MPa: 40; Flexural tensile strength, MPa: 12; Bond strength to concrete (failure in concrete), min., MPa: 2.0; Point-to-point resistance, Ohm, less than: 10^6; Point-to-ground resistance, Ohm*m, less than: 10^6 |
| Layer thickness | Layer thickness, mm: 5-15 |
| Shelf life | Shelf life, months: 6 |
| Standards | TU 23.64.10-006-82166262-2018 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Vapour-permeable water-based epoxy paint with a matt finish for workshops and outdoor areas, tinting to RAL.
Dry non-sparking hardening mix for the top layer of freshly laid concrete in workshops, warehouses, car parks and open areas.
Solvent-free antistatic epoxy self-levelling floor for production sites, warehouses, food and pharmaceutical premises and retail halls.
Mosaic concrete on crushed granite for ground terrazzo floors in public buildings, car parks and open areas.
Water-resistant polyurethane-cement floor for food and chemical plants, car parks and wet areas, with service temperatures up to +130 °C.
Anti-slip epoxy coating for decks and floors on metal and concrete, combustibility group G1, fire hazard class KM2.