ALFAPOL
ALFAPOL VK — cement self-levelling finishing floor
One-component cement self-levelling floor for workshops, warehouses, retail buildings and areas with significant static loads.
Price on request
ALFAPOL
ALFAPOL EP-2AS — antistatic epoxy self-levelling floor
The solvent-free self-levelling epoxy compound forms a smooth tinted coating that dissipates static charge: surface and volume resistance is below 10⁶ Ω. Shore D hardness is from 80, compressive strength 60 MPa, flexural strength 35 MPa, bond strength to concrete 2 MPa. Foot traffic at +20 °C is possible after 2 days and full cure after 7 days; the service range is −30 to +50 °C.
Specifications
| Manufacturer | ALFAPOL — OOO “ALFAPOL”, Saint Petersburg |
|---|---|
| Type | epoxy floors |
| Use | production halls, warehouses and logistics, food and pharmaceutical, chemically resistant, antistatic/conductive, wet areas, retail and public |
| Base | epoxy; Antistatic epoxy self-levelling floor |
| Colour | Self-levelling tinted solvent-free compound |
| Packaging | Metal containers: Component A – 20 kg. Component B – 5 kg. Polypropylene bag: Component C – graded (quartz) marble filler – 25 kg. |
| Application temperature | Application temperature, °C: +10°C to +30°C |
| Curing | At 10 / 20 / 30 °C: foot traffic after 3 / 2 / 1 days, medium load after 7 / 5 / 3 days, full load after 10 / 7 / 5 days; Recoat interval, min., hours: 12; Foot traffic, min., hours: 24; Full cure, min., days: 7 |
| Key properties | Service temperature, °C: from -30 to +50; Shore D hardness, min.: 80; Compressive strength, min., MPa: 60; Flexural strength, min., MPa: 35; Taber abrasion (CS10/1000 g/1000 rev), max., mg: 50; Bond strength to concrete (failure in concrete), min., MPa: 2; Surface electrical resistance (point-to-point), Ohm, less than: 10^6; Volume electrical resistance (to ground point), Ohm*m, less than: 10^6 |
| Consumption | Consumption for 1 mm thickness: 1.6 kg/m². Consumption for 2 mm thickness (filled with marble sand, fraction 0.2-0.5 mm, ratio 1:0.5): 2.43 kg/m² + 1.22 kg/m². Pot life (once spread on the surface), max., min: 30 |
| Shelf life | Shelf life – 6 months from the date of manufacture. |
| Standards | TU 20.16.40-001-82166262-2015 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by ALFAPOL
ALFAPOL
ALFAPOL PU-2Kh — chemical-resistant polyurethane self-levelling floor
Rigid-elastic polyurethane floor resistant to petroleum products, acids and alkalis for production sites, warehouses and wet rooms.
Price on request
ALFAPOL
ALFAPOL RFS(i) — non-sparking finishing repair mix
Cement-based non-sparking thixotropic mix with fine aggregate for repair and finish levelling of substrates in workshops and outdoor areas.
Price on request
ALFAPOL
ALFAPOL EP-1VP — water-emulsified vapour-permeable epoxy impregnation
Water-based vapour-permeable epoxy impregnation concentrate for freshly laid and old concrete: it eliminates dusting and strengthens.
Price on request
ALFAPOL
ALFAPOL MB(i) GSM — oil- and petrol-resistant non-sparking antistatic floor
Magnesia concrete floor on crushed marble that does not spark, dissipates static and withstands petrol and mineral oil.
Price on request
ALFAPOL
ALFAPOL PU-4VN ASKh — chemical-resistant antistatic polyurethane-cement floor
Antistatic polyurethane-cement floor resistant to chemicals, water and heat for workshops, warehouses, food plants and wet areas.
Price on request