ALFAPOL
ALFAPOL MB mosaic marble — magnesia terrazzo with marble
Non-shrink magnesia mosaic concrete with marble aggregate for decorative floors in retail and public buildings.
Price on request
ALFAPOL
ALFAPOL PU-4OGP ASKh — anti-slip antistatic polyurethane-cement floor
The four-component system containing quartz sand gives an anti-slip surface that both dissipates static and withstands chemical attack. The coating is designed for production areas with high abrasive, impact and mechanical loads, as well as for ramps, car parks, wet rooms and outdoor areas. Abrasion is no more than 0.4 g/cm², bond strength to the substrate from 2 MPa, and the upper service limit is up to +130 °C depending on the version.
Specifications
| Manufacturer | ALFAPOL — OOO “ALFAPOL”, Saint Petersburg |
|---|---|
| Type | polyurethane-cement floors |
| Use | production halls, warehouses and logistics, car parks and ramps, chemically resistant, antistatic/conductive, wet areas, outdoor areas |
| Base | Antistatic chemical-resistant polyurethane-cement floor, anti-slip heat-resistant coating |
| Packaging | component A — 3.4 kg, component B — 2.8 kg (plastic pails or canisters); component C — 3.3 kg (plastic pail); component D — quartz sand 0.4–0.8 mm or marble sand 0.2–0.5 mm (for the spark-safe version) |
| Application temperature | Application temperature, °C: +10°C to +30°C |
| Curing | At 20 °C: foot traffic after 3 days, medium load after 5 days, full load after 7 days |
| Key properties | Service temperature, °C: 2 mm layer from -10 to +70, 7 mm layer from -20 to +90, 9 mm layer from -30 to +130; Adhesion to mineral substrate at 28 days, min., MPa: 2 (failure in the substrate); Abrasion, max., g/cm²: 0.4 |
| Layer thickness | Layer thickness, mm: 2-10 |
| Consumption | Consumption: first intermediate layer, kg/m²: 0.6; second intermediate layer, kg/m²: 1.3; rough finishing layer, kg/m²: 0.4+0.4; smooth finishing layer, kg/m²: 0.4+1.2; quartz sand, fr. 0.4-0.8 mm, for broadcasting, kg/m² – 3; marble sand, fr. 0.2-0.5 mm, for broadcasting, kg/m² – 3 |
| Shelf life | Shelf life in factory packaging – 6 months from the date of manufacture. |
| Standards | TU 23.64.10-006-82166262-2018 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by ALFAPOL
ALFAPOL
ALFAGRUNT AS — conductive water-dispersion primer
Ready-to-use acrylic conductive primer for an adhesive, electrically conductive layer under antistatic mineral coatings.
Price on request
ALFAPOL
ALFAPOL RFS — thixotropic finishing repair mix
Thixotropic repair mix for filling defects and finish-levelling substrates in workshops and open areas.
Price on request
ALFAPOL
ALFAPOL EP-2AS — antistatic epoxy self-levelling floor
Solvent-free antistatic epoxy self-levelling floor for production sites, warehouses, food and pharmaceutical premises and retail halls.
Price on request
ALFAPOL
ALFAPOL EP-1VG — vapour-permeable epoxy primer-impregnation
Water-emulsified epoxy primer concentrate for freshly laid and old mineral substrates, vapour-permeable and consolidating.
Price on request
ALFAPOL
ALFAPOL VB-1000 — high-strength rapid-hardening concrete floor
Special-cement concrete floor with compressive strength from 80 MPa and foot traffic after 4–5 hours for workshops, warehouses and car parks.
Price on request