ALFAPOL
ALFAPOL VB(i) AS — antistatic non-sparking concrete floor
Cement-based antistatic concrete floor with crushed marble for workshops, warehouses and outdoor areas where the coating must not spark or build up charge.
Price on request
ALFAPOL
ALFAPOL PU-4S ASKh — chemical-resistant antistatic self-levelling PU-cement floor
A chemical-resistant version of the self-levelling antistatic polyurethane-cement: the main layer is laid over the PU-1V AS conductive layer with a copper earthing circuit. Shore D hardness is at least 80, compressive strength 50 MPa, bond strength to concrete 2 MPa, electrical resistance 10⁶ Ω. The coating can be tinted to RAL with restrictions and withstands −40 to +130 °C depending on the version; full load after 7 days at +20 °C.
Specifications
| Manufacturer | ALFAPOL — OOO “ALFAPOL”, Saint Petersburg |
|---|---|
| Type | polyurethane-cement floors |
| Use | production halls, chemically resistant, antistatic/conductive, wet areas, outdoor areas |
| Base | polyurethane-cement; Antistatic chemical-resistant self-levelling polyurethane-cement industrial floor |
| Colour | tinting to RAL with restrictions |
| Packaging | Plastic containers: Component A 9.6 kg, Component B 5.4 kg, Component C 25 kg, polypropylene bag |
| Application temperature | Application temperature, °C: +10 to +25 |
| Curing | At 20 °C: foot traffic after 3 days, medium load after 5 days, full load after 7 days; Recoat interval, min., hours: 24 |
| Key properties | Shore D hardness, min.: 80; Compressive strength, min., MPa: 50; Bond strength to concrete (failure in concrete), min., MPa: 2; Service temperature, °C: 6 mm layer from -25 to +80, 9 mm layer from -40 to +130; Surface electrical resistance (point-to-point), Ohm: 10^6; Volume electrical resistance (to ground point), Ohm*m: 10^6 |
| Layer thickness | Layer thickness, mm: 2.5-8 |
| Consumption | Consumption at 3 mm layer thickness, kg/m²: 5.25; at 2.5 mm layer thickness – 4.9 kg/m² |
| Shelf life | Shelf life, months: 6 |
| Standards | TU 23.64.10-006-82166262-2018 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by ALFAPOL
ALFAPOL
ALFAPOL VB-1000 — high-strength rapid-hardening concrete floor
Special-cement concrete floor with compressive strength from 80 MPa and foot traffic after 4–5 hours for workshops, warehouses and car parks.
Price on request
ALFAPOL
ALFAPOL KR — magnesia radon-proof self-levelling floor
Two-component magnesia self-levelling floor with radon-proof properties for workshops and warehouses, compressive strength 50 MPa.
Price on request
ALFAPOL
ALFAPOL TOP 300 — corundum liquid topping
Corundum "liquid topping" for wear-resistant finished floors with abrasion no more than 0.3 g/cm² in workshops and open areas.
Price on request
ALFAPOL
ALFAPOL K GSM — oil- and petrol-resistant magnesia self-levelling floor
Magnesia self-levelling floor for workshops and warehouses where petrol and mineral oils reach the coating, compressive strength 50 MPa.
Price on request
ALFAPOL
ALFAPOL EP-3 — gloss epoxy floor paint
Solvent-free gloss epoxy paint for floors in workshops, car parks, retail and public buildings, tinting to RAL.
Price on request