ALFAPOL RS — cement-based thixotropic repair mix
Cement-based thixotropic mix for repairing and levelling concrete substrates in workshops, wet rooms and open areas.

The material has two roles: an antistatic paint coating on concrete and a primer-base under thick-layer antistatic polyurethane-cement floors. The paint layer is applied over the PU-1V AS conductive layer; the electrical resistance of the finished coating is below 10⁷ Ω. Shore D hardness is at least 80, bond strength to concrete 2 MPa, service range −10 to +130 °C, full load after 7 days.
| Manufacturer | ALFAPOL — OOO “ALFAPOL”, Saint Petersburg |
|---|---|
| Type | polyurethane-cement floors |
| Use | production halls, chemically resistant, antistatic/conductive, wet areas, outdoor areas, retail and public |
| Base | Polyurethane-cement; Antistatic polyurethane-cement paint, primer and base for building thick-layer antistatic coatings |
| Colour | tinting to RAL with restrictions |
| Packaging | Plastic containers: Component A 3.4 kg, Component B 2.8 kg, Component C 3.3 kg |
| Application temperature | Application temperature, °C: from +10 to +25 |
| Curing | At 20 °C: foot traffic after 3 days, medium load after 5 days, full load after 7 days; Recoat interval, hours: 24 |
| Key properties | Shore D hardness, min.: 80; Compressive strength, MPa: 55; Bond strength to concrete (failure in concrete), min., MPa: 2; Service temperature, °C: from -10 to +130°C; Surface electrical resistance, Ohm, less than: 10^7; Volume electrical resistance, Ohm*m, less than: 10^7 |
| Shelf life | Shelf life, months: 6 |
| Standards | TU 23.64.10-006-82166262-2018 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Cement-based thixotropic mix for repairing and levelling concrete substrates in workshops, wet rooms and open areas.
Magnesia mosaic concrete with granite aggregate for decorative terrazzo floors in retail and public buildings.
Magnesia concrete floor with crushed marble for workshops and warehouses: it does not spark, dissipates static charge and resists petrol and mineral oil.
Radiation-shielding barite floor screed on magnesite, suitable under any floor finish.
Water-based vapour-permeable epoxy impregnation concentrate for freshly laid and old concrete: it eliminates dusting and strengthens.
Special-cement concrete floor with compressive strength from 80 MPa and foot traffic after 4–5 hours for workshops, warehouses and car parks.