ALFAPOL
ALFAPOL M-BARIT — magnesia radiation-shielding barite concrete
Magnesite-based barite concrete for radiation-shielding floor screeds, used together with ShT-BARIT plaster for walls and ceilings.
Price on request
ALFAPOL
ALFAPOL PU-4VN — heat- and chemical-resistant polyurethane-cement floor
The PU-4VN polyurethane-cement coating is designed for contact with water and chemical media and for heating up to +130 °C (depending on the version). Compressive strength is 50 MPa, flexural strength 15 MPa, bond strength to concrete 2 MPa; the main layer is laid over PU-4OG primer. The material is used in workshops, warehouses, car parks, food and pharmaceutical premises and outdoor areas; the colour is chosen from the manufacturer’s chart.
Specifications
| Manufacturer | ALFAPOL — OOO “ALFAPOL”, Saint Petersburg |
|---|---|
| Type | polyurethane-cement floors |
| Use | production halls, warehouses and logistics, car parks and ramps, food and pharmaceutical, chemically resistant, wet areas, outdoor areas, retail and public |
| Base | polyurethane-cement; Polyurethane-cement floor, water-resistant, heat-resistant, chemical-resistant industrial coating |
| Colour | tinting to the manufacturer's own colour chart |
| Packaging | Component A: 3.6 kg, Component B: 4.5 kg, Component C: 25 kg bag |
| Application temperature | Application temperature, °C: +10°C to +25°C; Substrate moisture, max.: 7%; Air and substrate temperature: from +10 to +25°C |
| Curing | At 20 °C: foot traffic after 3 days, medium load after 5 days, full load after 7 days; Recoat interval, h, min.: 24; Full cure, days, min.: 7 |
| Key properties | Compressive strength, MPa: 50; Flexural tensile strength, MPa: 15; Bond strength to concrete (failure in concrete), min., MPa: 2; Service temperature, °C: 6 mm layer from -25 to +80, 9 mm layer from -40 to +120, 12 mm layer from -40 to +130 |
| Layer thickness | Layer thickness, mm: 8-15 |
| Consumption | Consumption, kg/m²/mm: 1.89; 1.89 kg/m²/mm. |
| Shelf life | Shelf life, months: 6 |
| Standards | TU 23.64.10-006-82166262-2018 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by ALFAPOL
ALFAPOL
ALFAPOL VP — self-levelling floor screed
Industrial self-levelling compound for thin poured screeds in workshops and warehouses, combustibility class NG.
Price on request
ALFAPOL
ALFAPOL TOP 200(i) AS — antistatic non-sparking liquid topping
Liquid topping for hardening and levelling worn concrete floors without a noticeable rise in floor level, with antistatic properties.
Price on request
ALFAPOL
ALFAPOL VB-1000 — high-strength rapid-hardening concrete floor
Special-cement concrete floor with compressive strength from 80 MPa and foot traffic after 4–5 hours for workshops, warehouses and car parks.
Price on request
ALFAPOL
ALFAPOL EP-2TG — epoxy anti-slip deck coating
Anti-slip epoxy coating for decks and floors on metal and concrete, combustibility group G1, fire hazard class KM2.
Price on request
ALFAPOL
ALFAPOL EP-3 — gloss epoxy floor paint
Solvent-free gloss epoxy paint for floors in workshops, car parks, retail and public buildings, tinting to RAL.
Price on request