Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
ALFAPOL PU-3TM — matt polyurethane sealer for mineral and polymer floors
ALFAPOL

ALFAPOL PU-3TM — matt polyurethane sealer for mineral and polymer floors

Sealers and topcoats

The PU-3TM matt finishing coat is applied in two coats over PU-1G, PU-1 or PU-3T primer on mineral and polymer floors. The sealer resists fading, ultraviolet, water and chemical media, is elastic and easy to clean. Taber abrasion is no more than 50 mg, bond strength to concrete 2 MPa, full cure no less than 7 days.

Specifications

ManufacturerALFAPOL — OOO “ALFAPOL”, Saint Petersburg
Typesealers and topcoats
Usechemically resistant, outdoor areas, decorative
Basepolyurethane; Matt polyurethane sealer for mineral and polymer floors, resistant to fading and ultraviolet exposure
PackagingKit of 2 components: Component A – 4.25 kg in a plastic container. Component B – 0.5 kg in a metal container.
Application temperatureApplication temperature, °C: from +10 to +30
CuringAt 10 / 20 / 30 °C: foot traffic after 3 days / 2 days / 20 h, medium load after 5 / 3 / 1.5 days, full load after 7 / 5 / 3 days; Recoat interval, h, min.: 12-24; Full cure, days, min.: 7
Key propertiesTaber abrasion (CS10/1000 g/1000 rev), max., mg: 50; Bond strength to concrete (failure in concrete), min., MPa: 2; Service temperature, °C: from -30 to +50
ConsumptionConsumption, kg/m²: 0.05-0.07; Consumption – 0.05-0.07 kg/m² per 1 coat.
Shelf lifeShelf life in unopened factory packaging – 6 months from the date of manufacture.; Shelf life, months: 6
StandardsTU 20.16.56-004-82166262-2017

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by ALFAPOL