ALFAPOL
ALFAPOL TOP 100(i) — non-sparking dry topping for concrete
Dry non-sparking hardening mix for the top layer of freshly laid concrete in workshops, warehouses, car parks and open areas.
Price on request
ALFAPOL
ALFAGRUNT Concentrate Porozapolnitel — impregnation for mosaic concrete
Ground mosaic concrete on magnesite and cement is sealed with this water-dispersion concentrate, which closes the surface pores. The compound is based on a water-based acrylic dispersion, with bond strength to the substrate of at least 1.2 MPa. The material is supplied in 10 kg canisters, and works are carried out at +10…+25 °C.
Specifications
| Manufacturer | ALFAPOL — OOO “ALFAPOL”, Saint Petersburg |
|---|---|
| Type | concrete impregnations and hardeners |
| Use | decorative |
| Base | water-based acrylic dispersion; Compound for sealing ground mosaic concrete |
| Packaging | in 10 kg canisters |
| Application temperature | Application temperature, °C: from +10 to +25 |
| Key properties | Bond strength (adhesion) of the primer to the substrate, MPa, min.: 1.2; Frost resistance, cycles, at t not below -18°C: 5 |
| Consumption | 0.4-0.5 kg/m² (poured, followed by grinding) |
| Shelf life | Shelf life in intact factory packaging – 1 year. |
| Standards | TU 20.30.11-008-82166262; TU 20.30.11-008-82166262-2005 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by ALFAPOL
ALFAPOL
ALFAPOL VB-1000 — high-strength rapid-hardening concrete floor
Special-cement concrete floor with compressive strength from 80 MPa and foot traffic after 4–5 hours for workshops, warehouses and car parks.
Price on request
ALFAPOL
ALFAPOL PU-4OGP ASKh — anti-slip antistatic polyurethane-cement floor
Seamless anti-slip polyurethane-cement coating with antistatic and chemical-resistant properties for workshops, ramps, car parks and wet areas.
Price on request
ALFAPOL
ALFAPOL VB(i) ZIMA — non-sparking concrete floor for the cold season
Non-sparking concrete floor laid at temperatures from −5 to +10 °C, for workshops, warehouses and open areas.
Price on request
ALFAPOL
ALFAPOL PU-3TM — matt polyurethane sealer for mineral and polymer floors
Matt polyurethane sealer, resistant to fading and ultraviolet, for protecting mineral and polymer floors.
Price on request
ALFAPOL
ALFAPOL BR P — heat-resistant concrete floor on Portland cement
Heat-resistant concrete floor of class I13 with crushed chamotte for forging, steelmaking, rolling and heat-treatment shops.
Price on request