LITSIL® S55 — high-gloss protective polish for concrete
Water-reducible topcoat that is polished with a burnisher to a high gloss and protection against water penetration.

This lithium hardener offers additional protection against dirt: besides hardening, it reduces the water absorption of concrete. The manufacturer recommends it for outdoor areas as well as for workshops and warehouses. The base is an aqueous solution of lithium polysilicates with 12 % active content; it is applied at temperatures not below +5 °C. Taber abrasion resistance to ASTM D4060 rises by 20–50 %.
| Manufacturer | LITSIL — OOO “Litium”, Noginsk |
|---|---|
| Type | concrete impregnations and hardeners |
| Use | production workshops, warehouses and logistics, outdoor areas |
| Base | aqueous solution of lithium polysilicates; active content 12 %, VOC 0 % |
| Colour | colourless opalescent liquid |
| Packaging | 20 l canisters, 200 l drums, 1000 l IBC containers |
| Application method | spraying (low-pressure pump sprayer) with spreading by brush or rotary machine; remove excess after 30 min; grinding 80–200 grit |
| Application temperature | not below +5 °C (air and surface) until dry |
| Key properties | solids content 12 %; density 1.10 g/cm3; pH 11.0; viscosity 10 mPa·s; Taber abrasion resistance (ASTM D4060): increase of 20 to 50 %; pull-off strength (ASTM D4541): increase of 25 to 75 %; compressive strength (ASTM C805): increase of 10 to 30 %; climatic chamber (G-154): no change (28-day concrete, compared with untreated) |
| Consumption | 0.05–0.20 l/m2 |
| Shelf life | 2 years from the date of manufacture, indoors at +4…+35 °C in the original packaging; do not freeze; use opened containers within 1 month |
| Standards | tested to ASTM D4060, D4541, C805, G-154 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Water-reducible topcoat that is polished with a burnisher to a high gloss and protection against water penetration.
Lithium polysilicate impregnation with 15 % active content — the core product for decorative polished concrete systems.
Solvent-based water repellent for concrete, brick, ceramics, paving slabs, stone and plaster, including on outdoor areas.
Concentrated polymer compound for repairing defects, including cracks, and strengthening the surface layer of polished concrete.
Industrial solvent for removing curing compounds, sealers, adhesives, oils and bitumen from concrete, free of methylene chloride.
Violet lithium impregnation for fresh concrete: it is sprayed ahead of the power trowel, and you can see at once where it has already been applied.