LITSIL® D50 — ready-to-use dyes for colouring ground concrete
A set of 7 basic ready-to-use dyes for colouring ground concrete in retail and decorative interiors.

Curing of fresh concrete without sheeting or watering is provided by this water-based membrane-forming compound complying with ASTM C 309. It is sprayed onto freshly placed surfaces in workshops, warehouses and outdoor areas. Foot traffic on the concrete is possible no earlier than 12 h after the last application. Work is carried out at temperatures from +5 °C if no rain, dew or condensation is expected within the next 4 h.
| Manufacturer | LITSIL — OOO “Litium”, Noginsk |
|---|---|
| Type | floor material |
| Use | production workshops, warehouses and logistics, outdoor areas |
| Base | water-based membrane-forming curing compound; VOC <0.10 % |
| Colour | milky-white liquid |
| Packaging | 20 l canisters, 200 l drums, 1000 l IBC containers |
| Application method | spraying onto fresh concrete |
| Application temperature | not below +5 °C (air and surface); do not apply if rain, dew or condensation is expected within 4 h |
| Curing | foot traffic no earlier than 12 h after the last application |
| Key properties | density 1.01 g/cm3; pH 7.5 |
| Consumption | 0.10–0.20 l/m2 |
| Shelf life | 2 years from the date of manufacture, indoors at +4…+35 °C in the original packaging; do not freeze; use opened containers within 1 month |
| Standards | ASTM C 309 "Liquid Membrane-Forming Compounds" |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
A set of 7 basic ready-to-use dyes for colouring ground concrete in retail and decorative interiors.
Deep-penetrating water repellent based on a blend of silanes and siloxanes for concrete, brick, marble, stone and ceramics.
Lithium impregnation with hybrid polymers for curing fresh concrete to ASTM C 309, adding gloss and protection against oils.
Industrial solvent for removing curing compounds, sealers, adhesives, oils and bitumen from concrete, free of methylene chloride.
Water-based binder mixed with Portland cement and rubbed into ground concrete to fill cavities, pores and potholes.
Silicate concentrate sprayed onto fresh concrete ahead of the power trowel — an alternative to dry-shake hardeners for workshops and car parks.