Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
BIRSS Leytlak — conductive layer of an antistatic floor
BIRSS

BIRSS Leytlak — conductive layer of an antistatic floor

Floor primers

The black two-component solvent-free compound is applied over Kharts primer and the copper earthing tape and then covered with self-levelling Leytpol. The manufacturer calls the product a varnish, but by its role in the system it is a conductive priming layer that provides the electrical conductivity of the whole coating. Bond to concrete is at least 3.5 N/mm², service temperature −20…+60 °C, foot traffic is allowed after 3 days.

Specifications

ManufacturerBIRSS — AO “Opytny Zavod Sukhikh Smesey”, Moscow
Typefloor primers
Useantistatic/conductive, production halls
Basetwo-component water-emulsifiable solvent-free epoxy compound (conductive layer)
Colourblack
Packagingmetal pails, kit (A+B) 16 kg
Application methodelectrically conductive layer of the Leytpol system over Kharts primer and copper tape; 1–2 coats
Application temperaturenot below +15 °C
Curingdrying to degree 3 — 6–8 h; further work after 24 h; foot traffic after 3 days; full cure after 7 days
Key propertiesspecific gravity 1.3 g/cm³; pot life at least 60 min; bond to concrete at least 3.5 N/mm²; service temperature −20…+60 °C (wet exposure up to +40 °C)
Consumption0.2–0.25 kg/m² for 1–2 coats
Shelf lifenot more than 6 months in closed original packaging; protect from sunlight, heat and freezing
StandardsTU 2257-018-05668056-01 with amendments No. 1, No. 2; substrate to SP 71.13330.2017 (cl. 8.12)

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by BIRSS