BIRSS
BIRSS RSM-1 M350 — two-component polymer-cement R3 repair system
Two-component mortar for repairing vertical, inclined and overhead concrete areas on bridges and in buildings; placing is possible from −10 °C.
Price on request
BIRSS
BIRSS Polilak 2W matt — waterborne polyurethane sealer
Unlike the other Polilak sealers, the 2W version is water-emulsifiable and solvent-free, and tools are washed with warm water after use. The varnish gives a deep-matt surface on Izipol, Riberpol and Multipol floors and on concrete, while remaining wear-resistant, non-slip and resistant to UV, water, salt solutions and fuels and lubricants. The manufacturer notes the improved environmental safety of the compound.
Specifications
| Manufacturer | BIRSS — AO “Opytny Zavod Sukhikh Smesey”, Moscow |
|---|---|
| Type | sealers and finish coats |
| Use | production halls, retail and public, food and pharmaceutical, decorative |
| Base | two-component water-emulsifiable solvent-free polyurethane varnish |
| Colour | deep matt, unpigmented |
| Packaging | kits 10 and 20 kg |
| Application method | by roller, criss-cross, wet-on-wet; clean tools with warm water |
| Key properties | wear-resistant, non-slip, resistant to UV radiation, water, neutral salt solutions, fuels and lubricants (medium intensity); improved environmental safety |
| Consumption | 0.18–0.2 kg/m² for a single coat (at least two coats are recommended where requirements are higher) |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by BIRSS
BIRSS
BIRSS Akvapol — water-emulsifiable epoxy floor
Solvent-free waterborne epoxy compound for painted and self-levelling floors in food plants, warehouses, car parks and retail halls.
Price on request
BIRSS
BIRSS Singlfleks enamel — wear-resistant polyurethane floor enamel
One-component polyurethane enamel in RAL colours — the finish coat of the Singlfleks system for production halls, garages, warehouses and cold rooms.
Price on request
BIRSS
BIRSS RBG M500 — two-component R4 repair mix with granite aggregate
Kit of dry mix and granite aggregate for repairing ramps, bridge abutments, channels, floors and slab joints; modulus of elasticity 25,000 MPa.
Price on request
BIRSS
BIRSS Kontakt — epoxy impregnation-hardener for concrete floors
Three-component solvent-free epoxy impregnation for fresh and old concrete floors: hardens the surface and slows water evaporation.
Price on request
BIRSS
BIRSS 59 S1 M800 Moroz — high-strength flowable R4 mix for the cold season
High-strength flowable mortar for repairing pavements, bridges and floors in frost: at −15 °C it reaches 45 MPa in compression in 28 days.
Price on request