QTP
QTP® 0110 — alkaline cleaning agent for polymer floors
Product for manual and machine cleaning of epoxy and polyurethane floors to remove grease, oil and tyre marks.
Price on request
QTP
QTP® 1040 — epoxy self-levelling floor with enhanced chemical resistance
Enhanced chemical resistance and low Taber abrasion of 32 mg are the key properties of this epoxy self-levelling compound. The manufacturer describes it as a solution for extra-strong, chemical-resistant coatings on tight schedules. It is poured or roller-applied to produce smooth, slip-resistant and highly filled levelling coatings. Foot traffic is possible after 12 h at +20 °C; continuous heat resistance is up to +50 °C.
Specifications
| Manufacturer | QTP — OOO “KTP”, Noginsk |
|---|---|
| Type | epoxy floors |
| Use | production workshops, chemically resistant, warehouses and logistics |
| Base | two-component pigmented epoxy compound with enhanced chemical resistance, solvent-free |
| Colour | tinted to the QTP colour chart or RAL K |
| Packaging | 22 kg kit: component A 20 kg (20 l pail) + component B 2.0 kg (5 l pail) |
| Application method | poured or roller-applied; smooth, slip-resistant and highly filled levelling coatings |
| Application temperature | substrate +10…+30 °C (3 °C above the dew point); air +15…+30 °C |
| Curing | at +10/+20/+30 °C: foot traffic after 24 / 12 / 10 h; light load after 6 / 3 / 2 days; full load after 10 / 7 / 5 days |
| Key properties | compressive strength 68 MPa; flexural strength 44 MPa; tensile strength 27 MPa; impact strength 40 kJ/m2; Shore D hardness 86; Taber abrasion (CS-10/1000/1000) 32 mg; heat resistance: continuous +50 °C, up to 7 days +80 °C, up to 12 h +100 °C; pot life at 20 °C 25 min |
| Shelf life | 6 months from the date of manufacture in unopened containers, in a dry, cool room at +15…+25 °C, protected from sub-zero temperatures and direct sunlight |
| Standards | SGR RU.18.UTs.02.015.E.000127.06.24 dated 03.06.2024 (epoxy compounds for industrial floors, TU 20.30.22-019-28912903-2023; grade listed in the annex); test methods DIN / EN ISO / Taber |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by QTP
QTP
QTP® 2161 — colourless matt water-based polyurethane varnish
Two-component water-based polyurethane varnish for a matt finish coat on polymer floors.
Price on request
QTP
QTP® 1140 — decorative tintable epoxy self-levelling floor
Tintable epoxy compound for a self-levelling top layer or stand-alone coating in public and decorative interiors.
Price on request
QTP
QTP® 3050 — thixotropic water-reducible epoxy paint
Thixotropic water-based epoxy paint for chemical protection of floors, walls and ceilings at food and pharmaceutical plants.
Price on request
QTP
QTP® 1210 — coloured epoxy primer for polymer systems
Multi-purpose budget epoxy primer with a pigmented component for polymer floors, filler coats and repair compounds.
Price on request
QTP
QTP® 3030 — water-reducible epoxy self-levelling floor for workshops and warehouses
Vapour-permeable water-reducible epoxy compound for smooth, slip-resistant and levelling poured coatings over QTP 3000 primer.
Price on request