QTP® 1020 — epoxy levelling and pore-sealing layer
Solvent-free epoxy compound for levelling, pore sealing and making filler compounds in polymer floor systems.

A decorative tinted finish coating is the main purpose of this solvent-free epoxy compound. It is used as a self-levelling top layer or as a stand-alone coating in retail, public and production premises. Taber abrasion is 44 mg, compressive strength 75 MPa and pot life at 20 °C 60 minutes. The coating withstands +50 °C continuously and +100 °C for up to 12 h.
| Manufacturer | QTP — OOO “KTP”, Noginsk |
|---|---|
| Type | epoxy floors |
| Use | retail and public buildings, decorative, production workshops |
| Base | two-component pigmented epoxy compound, solvent-free |
| Colour | colour from the standard QTP colour chart, tinting to RAL K |
| Packaging | 20.8 kg kit: component A 16 kg (20 l pail) + component B 4.8 kg (5 l pail) |
| Application method | self-levelling top layer or stand-alone coating |
| Application temperature | substrate +10…+30 °C (3 °C above the dew point); air +15…+40 °C |
| Curing | at +10/+20/+30 °C: foot traffic after 24 / 12 / 10 h; light load after 6 / 3 / 2 days; full load after 10 / 7 / 5 days |
| Key properties | compressive strength 75 MPa; flexural strength 62 MPa; tensile strength 30 MPa; impact strength 48 kJ/m2; hardness 82 (DIN 53 505); Taber abrasion (CS-10/1000/1000) 44 mg; heat resistance: continuous +50 °C, up to 7 days +80 °C, up to 12 h +100 °C; pot life at 20 °C 60 min |
| Shelf life | 12 months from the date of manufacture in unopened containers, in a dry, cool room at +15…+25 °C, protected from sub-zero temperatures and direct sunlight |
| Standards | SGR RU.18.UTs.02.015.E.000127.06.24 dated 03.06.2024 (epoxy compounds for industrial floors, TU 20.30.22-019-28912903-2023; grade listed in the annex); test methods DIN / EN ISO / Taber |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Solvent-free epoxy compound for levelling, pore sealing and making filler compounds in polymer floor systems.
Decorative solvent-free high-gloss epoxy paint for thin-film protection of concrete and as a finish for polymer floors.
Static-conductive polyurethane finish for an antistatic system over QTP 1000 and QTP 3010 AS primers with copper tape.
Vapour-permeable water-based epoxy coating with a semi-matt silky surface for substrates with residual moisture.
Polyurethane self-levelling compound with 90 % elongation for substrates subject to vibration, movement and cracking.
Epoxy paint compound of the rapid repair system for a thin-film and slip-resistant finish over QTP 1700 primer.