QTP® 1040 — epoxy self-levelling floor with enhanced chemical resistance
Extra-strong epoxy self-levelling compound with enhanced chemical resistance for workshops, warehouses and chemically exposed areas.

A high gloss sets this epoxy paint apart among the QTP paint products. It is applied in a thin coat to concrete primed with QTP 1000 or used as a finish coat of polymer coatings in workshops, retail and decorative premises. Compressive strength is 75 MPa, impact strength 48 kJ/m² and Taber abrasion 60 mg. The colour is selected from the QTP chart or RAL K.
| Manufacturer | QTP — OOO “KTP”, Noginsk |
|---|---|
| Type | epoxy floors |
| Use | production workshops, retail and public buildings, decorative |
| Base | two-component high-gloss epoxy paint for concrete, solvent-free |
| Colour | high gloss; colour from the QTP chart, tinting to RAL K |
| Packaging | 20.8 kg kit: component A 16 kg (20 l pail) + component B 4.8 kg (5 l pail) |
| Application method | thin-film protective coating on concrete (QTP 1000 primer) or finish coat of polymer coatings |
| Application temperature | substrate +10…+30 °C; air +15…+30 °C |
| Curing | at +10/+20/+30 °C: foot traffic after 32 / 20 / 16 h; light load after 7 / 3 / 2 days; full load after 10 / 7 / 6 days |
| Key properties | compressive strength 75 MPa; flexural strength 62 MPa; tensile strength 30 MPa; impact strength 48 kJ/m2; hardness 82; Taber abrasion 60 mg; heat resistance: continuous +50 °C, up to 7 days +80 °C, up to 12 h +100 °C |
| Consumption | on concrete: QTP 1000 primer 0.25–0.35 + 2 coats of 0.15–0.25 kg/m2 each; on anti-slip epoxy coatings: 0.65 + 0.30 kg/m2 |
| Shelf life | 12 months from the date of manufacture in unopened containers, in a dry, cool room at +15…+25 °C, protected from sub-zero temperatures and direct sunlight |
| Standards | SGR KG.11.01.09.008.E.002319.06.18 dated 19.06.2018 (epoxy enamels, TU 2312-003-28912903-2014; grade listed); test methods DIN / EN ISO / Taber |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Extra-strong epoxy self-levelling compound with enhanced chemical resistance for workshops, warehouses and chemically exposed areas.
Three-component conductive polyurethane-cement with continuous heat resistance up to +110 °C for antistatic chemical-resistant floors.
Rigid solvent-free polyurethane compound for smooth, slip-resistant and levelling coatings in workshops, warehouses and retail halls.
Polyurethane compound for sealing pores and bonding rubber mats and underlays in sports floor systems.
Pigmented conductive epoxy compound for antistatic floors in workshops with ESD control and in robotic warehouses.
Solvent-free epoxy paint for a thin-film protective coating on concrete or a finish coat in workshops, warehouses and halls.