Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
QTP® 2640 AS — conductive polyurethane-cement for chemical-resistant floors
QTP

QTP® 2640 AS — conductive polyurethane-cement for chemical-resistant floors

Polyurethane-cement floors

This three-component polyurethane-cement compound combines antistatic properties with high heat and chemical resistance. The smooth self-levelling coating is laid only over QTP 3010 AS static-conductive primer; vertical electrical resistance is below 10⁶ Ω. Continuous heat resistance is +110 °C, and up to +130 °C for up to 12 h; Shore D hardness is 88. A semi-gloss version, QTP 2640g AS, is available.

Specifications

ManufacturerQTP — OOO “KTP”, Noginsk
Typepolyurethane-cement floors
Useantistatic/conductive, chemically resistant, production workshops
Basethree-component pigmented conductive polyurethane-cement compound, solvent-free; solids content ~92 %
Colourtintable; the gloss version (QTP 2640g AS) is semi-gloss
Packaging15.0 kg (A 4.25 kg + B 5.75 kg + C 5.00 kg) and 13.5 kg kits
Application methodsmooth self-levelling antistatic coating with high heat and chemical resistance
Application temperaturesubstrate +10…+30 °C (3 °C above the dew point); air +10…+30 °C
Key propertiesvertical electrical resistance Rv <10^6 Ω (2.0 mm over QTP 3010 AS); compressive strength 65 MPa; flexural strength 32 MPa; tensile strength 22 MPa; impact strength 9.7 J/cm3; Shore D hardness 88; Taber abrasion (CS-17, 1 kg, 1000 cycles, ASTM D4060) 67 mg; heat resistance: continuous +110 °C, up to 7 days +120 °C, up to 12 h +130 °C; resistant to most chemicals (table on request)
Layer thickness2.0 mm (for the stated Rv)
Shelf life12 months from the date of manufacture in unopened containers, in a dry, cool room at +15…+25 °C, protected from sub-zero temperatures and direct sunlight
Standardsthe grade is not listed in the SGRs reviewed on qtp.ru (epoxy compounds 2024, polyurethane compounds 2015, epoxy enamels 2018); the manufacturer is the same — OOO "KTP", Noginsk; electrical resistance to GOST IEC 61340-4-1; abrasion to ASTM D4060; test methods DIN / EN ISO / Taber

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by QTP