QTP
QTP® 1230 — epoxy self-levelling compound for workshops, warehouses and healthcare
Pigmented solvent-free epoxy self-levelling floor for production, storage, medical and public premises.
Price on request
QTP
QTP® 1020 — epoxy levelling and pore-sealing layer
A levelling and pore-sealing layer in polymer coating systems is the main task of this epoxy compound. It is also used as a binder for filler compounds and can be filled with sand; according to the manufacturer, the material is relatively low-cost. Compressive strength is 65 MPa and Shore D hardness 80. The kit weighs 32.1 kg; pot life at 20 °C is 20 minutes.
Specifications
| Manufacturer | QTP — OOO “KTP”, Noginsk |
|---|---|
| Type | epoxy floors |
| Use | production workshops, warehouses and logistics |
| Base | two-component epoxy compound, solvent-free |
| Colour | component A is milky white; tinting to the QTP colour chart, approximately to RAL K |
| Packaging | 32.1 kg kit: component A 30 kg (20 l pail) + component B 2.1 kg (6 l pail) |
| Application method | pore-sealing and levelling layer in polymer coating systems; binder for filler compounds; can be filled with sand |
| Application temperature | substrate +10…+30 °C (3 °C above the dew point); air +10…+30 °C |
| Curing | at +10/+20/+30 °C: foot traffic after 24 / 12 / 10 h; light load after 6 / 3 / 2 days; full load after 10 / 7 / 5 days |
| Key properties | compressive strength 65 MPa; flexural strength 27 MPa; tensile strength 18 MPa; Shore D hardness 80; Taber abrasion (DIN 53 754) 60 mg; heat resistance: continuous +50 °C, up to 7 days +80 °C, up to 12 h +100 °C; pot life at 20 °C 20 min |
| Shelf life | 6 months from the date of manufacture in unopened containers, in a dry, cool room at +15…+25 °C, protected from sub-zero temperatures and direct sunlight |
| Standards | SGR RU.18.UTs.02.015.E.000127.06.24 dated 03.06.2024 (epoxy compounds for industrial floors, TU 20.30.22-019-28912903-2023; grade listed in the annex); test methods DIN / EN ISO / Taber |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by QTP
QTP
QTP® 1051 — epoxy paint for protecting concrete floors
Two-component epoxy paint for a thin-film coating on concrete over QTP 1000 or 1010 primers in workshops and warehouses.
Price on request
QTP
QTP® 2161 AS — conductive matt polyurethane varnish for ESD areas
Coloured matt water-based polyurethane varnish for finishing and renovating antistatic floors in ESD-protected areas.
Price on request
QTP
QTP® 1040 AS — chemical-resistant conductive epoxy self-levelling floor
Conductive epoxy finish with enhanced chemical resistance for protecting electronic equipment against discharges of up to 5 kV.
Price on request
QTP
QTP® 3000 — water-reducible epoxy primer for damp substrates
Colourless water-based epoxy primer that can be applied to damp surfaces and to fresh and old concrete.
Price on request
QTP
QTP® 1151 — high-gloss epoxy paint for concrete
Decorative solvent-free high-gloss epoxy paint for thin-film protection of concrete and as a finish for polymer floors.
Price on request