Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
QTP® 3000 — water-reducible epoxy primer for damp substrates
QTP

QTP® 3000 — water-reducible epoxy primer for damp substrates

Floor primers

Application on damp surfaces is the key property of this water-reducible epoxy primer. It is used neat or with quartz, for impregnating fresh and old concrete and screeds, and for protecting fresh concrete during equipment installation before the polymer coating is applied. The solids content is 54 % and compressive strength 85 MPa. Continuous heat resistance is up to +70 °C.

Specifications

ManufacturerQTP — OOO “KTP”, Noginsk
Typefloor primers
Useproduction workshops, warehouses and logistics, wet rooms
Basetwo-component water-reducible colourless epoxy primer; solids content 54 %
Colourcolourless
Packaging20.00 kg kit: component A 10 kg (20 l pail) + component B 10 kg (10 l canister)
Application methodprimer (neat resin or with quartz), including on damp surfaces; impregnation of fresh and old concrete and cement-sand screeds; protection of fresh concrete during equipment installation before the polymer coating is applied
Application temperaturesubstrate +10…+30 °C; air +15…+30 °C
Curingat +10/+20/+30 °C: foot traffic after 36 / 24 / 16 h; light load after 7 / 5 / 3 days; full load after 14 / 7 / 5 days
Key propertiescompressive strength 85 MPa; flexural strength 35 MPa; tensile strength 22 MPa; impact strength 32 kJ/m2; Shore D hardness 86; heat resistance: continuous +70 °C, up to 7 days +90 °C, up to 12 h +110 °C; pot life 30 min
Consumption0.25–0.35 kg/m2 per coat, excluding dilution
Shelf life6 months from the date of manufacture in unopened containers, in a dry, cool room at +15…+25 °C, protected from sub-zero temperatures and direct sunlight
Standardsthe grade is not listed in the SGRs reviewed on qtp.ru (epoxy compounds 2024, polyurethane compounds 2015, epoxy enamels 2018); the manufacturer is the same — OOO "KTP", Noginsk; test methods DIN / EN ISO / Taber

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by QTP