Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
QTP® 1340 AS — static-conductive chemical-resistant epoxy finish
QTP

QTP® 1340 AS — static-conductive chemical-resistant epoxy finish

Epoxy floors

High chemical resistance and static-conductive properties are combined in this smooth epoxy self-levelling coating. It is applied only over QTP 3010 AS static-conductive primer. Electrical resistance is below 10⁶ Ω, Shore D hardness 90, flexural strength 76 MPa and Taber abrasion 42 mg. Foot traffic is possible after 16 h at +20 °C.

Specifications

ManufacturerQTP — OOO “KTP”, Noginsk
Typeepoxy floors
Useantistatic/conductive, chemically resistant, production workshops
Basetwo-component pigmented static-conductive chemical-resistant epoxy compound, solvent-free
Colourtintable
Packaging20.8 kg kit: component A 16 kg + component B 4.8 kg (5 l pail)
Application temperaturesubstrate +10…+30 °C; air +15…+30 °C
Curingat +10/+20/+30 °C: foot traffic after 32 / 16 / 10 h; light load after 6 / 3 / 2 days; full load after 10 / 7 / 5 days
Key propertieselectrical resistance <10^6 Ω; compressive strength 62 MPa; flexural strength 76 MPa; tensile strength 21 MPa; impact strength 44 kJ/m2; Shore D hardness 90; Taber abrasion 42 mg; heat resistance: continuous +50 °C, up to 7 days +70 °C, up to 12 h +80 °C
Shelf life12 months from the date of manufacture in unopened containers, in a dry, cool room at +15…+25 °C, protected from sub-zero temperatures and direct sunlight
StandardsSGR RU.18.UTs.02.015.E.000127.06.24 dated 03.06.2024 (epoxy compounds for industrial floors, TU 20.30.22-019-28912903-2023; grade listed in the annex); test methods DIN / EN ISO / Taber

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by QTP