QTP
QTP® 1051 — epoxy paint for protecting concrete floors
Two-component epoxy paint for a thin-film coating on concrete over QTP 1000 or 1010 primers in workshops and warehouses.
Price on request
QTP
QTP® 1240 — multi-purpose solvent-free epoxy self-levelling floor
This multi-purpose self-levelling compound based on modified epoxy resins forms a gloss coating that resists yellowing and readily accepts sand filling. It is used in production workshops, warehouses, medical and educational institutions and exhibition halls. Compressive strength is 65 MPa, Shore D hardness 82 and Taber abrasion 65 mg. The floor can take foot traffic after 24 h at +20 °C and full load after 7 days.
Specifications
| Manufacturer | QTP — OOO “KTP”, Noginsk |
|---|---|
| Type | epoxy floors |
| Use | production workshops, warehouses and logistics, retail and public buildings |
| Base | two-component pigmented epoxy compound based on modified epoxy resins, solvent-free (A:B = 100:30) |
| Colour | gloss; tinted to RAL K, custom tinting available |
| Packaging | 20.8 kg kit: component A 16 kg (20 l pail) + component B 4.8 kg (5 l pail) |
| Application method | poured as a self-levelling layer (substrate slope not more than 3 %) over QTP primers; can be filled with sand; recoat interval at +20 °C 24–36 h |
| Application temperature | substrate +10…+30 °C; air +15…+30 °C and at least 4 °C above the dew point; air humidity not more than 75 % |
| Curing | at +10/+20/+30 °C: foot traffic after 36 / 24 / 18 h; light load after 6 / 3 / 2 days; full load after 10 / 7 / 5 days |
| Key properties | compressive strength 65 MPa (EN ISO 604); flexural strength 52 MPa; tensile strength 29 MPa; impact strength 42 kJ/m2; Shore D hardness 82; Taber abrasion (CS-10/1000/1000) 65 mg; heat resistance (dry heat): continuous +40 °C, up to 7 days +50 °C, up to 12 h +70 °C; pot life at 20 °C 35 min |
| Shelf life | 12 months from the date of manufacture in unopened containers, in a dry, cool room at +15…+25 °C, protected from sub-zero temperatures and direct sunlight |
| Standards | SGR RU.18.UTs.02.015.E.000127.06.24 dated 03.06.2024 (epoxy compounds for industrial floors, TU 20.30.22-019-28912903-2023; grade listed in the annex); test methods DIN / EN ISO / Taber |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by QTP
QTP
QTP® 2030 — elastic polyurethane self-levelling floor for moving substrates
Polyurethane self-levelling compound with 90 % elongation for substrates subject to vibration, movement and cracking.
Price on request
QTP
QTP® 0310 — surface modifier for polymer floors over tiles
One-component adhesion promoter for applying polymer floors over glazed tiles, porcelain stoneware, glass and granite.
Price on request
QTP
QTP® 1000 — deep-penetrating epoxy primer
Low-viscosity solvent-free epoxy primer with rapid strength gain for concrete, screeds and polymer systems.
Price on request
QTP
QTP® 3030 — water-reducible epoxy self-levelling floor for workshops and warehouses
Vapour-permeable water-reducible epoxy compound for smooth, slip-resistant and levelling poured coatings over QTP 3000 primer.
Price on request
QTP
QTP® 1230 AS — antistatic epoxy floor for cleanrooms
Pigmented conductive epoxy compound for antistatic floors in workshops with ESD control and in robotic warehouses.
Price on request