QTP® 1140 AS — tinted antistatic self-levelling finish
Smooth tinted epoxy antistatic coating applied over QTP 3010 AS static-conductive primer.

Antistatic, static-conductive and static-dissipative coatings are produced with this pigmented solvent-free epoxy compound. It is designed for workshops with ESD control requirements, cleanrooms and robotic warehouses. Electrical resistance is below 10⁶ Ω, Shore D hardness 82 and Taber abrasion 68 mg. The product is supplied as a 24 kg kit; work is carried out at +15…+30 °C.
| Manufacturer | QTP — OOO “KTP”, Noginsk |
|---|---|
| Type | epoxy floors |
| Use | antistatic/conductive, production workshops, warehouses and logistics |
| Base | two-component pigmented conductive epoxy compound, solvent-free |
| Colour | tintable |
| Packaging | 24 kg kit: component A 20 kg (20 l pail) + component B 4 kg (5 l pail) |
| Application method | static-conductive, static-dissipative and antistatic floor coatings; consumption rates and thicknesses are provided by QTP specialists |
| Application temperature | substrate +15…+30 °C; air +15…+30 °C |
| Curing | at +10/+20/+30 °C: foot traffic after 36 / 24 / 18 h; light load after 6 / 3 / 2 days; full load after 10 / 7 / 5 days |
| Key properties | electrical resistance <10^6 Ω; compressive strength 65 MPa; flexural strength 52 MPa; tensile strength 29 MPa; impact strength 42 kJ/m2; Shore D hardness 82; Taber abrasion 68 mg; heat resistance: continuous +40 °C, up to 7 days +50 °C, up to 12 h +70 °C |
| Shelf life | 12 months from the date of manufacture in unopened containers, in a dry, cool room at +15…+25 °C, protected from sub-zero temperatures and direct sunlight |
| Standards | SGR RU.18.UTs.02.015.E.000127.06.24 dated 03.06.2024 (epoxy compounds for industrial floors, TU 20.30.22-019-28912903-2023; grade listed in the annex); test methods DIN / EN ISO / Taber |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Smooth tinted epoxy antistatic coating applied over QTP 3010 AS static-conductive primer.
Multi-purpose budget epoxy primer with a pigmented component for polymer floors, filler coats and repair compounds.
Water-reducible static-conductive epoxy finish for vapour-permeable antistatic floors with electrical resistance of 10⁴–10⁶ Ω.
Grey gloss polyurethane paint that cures with atmospheric moisture and can be applied at temperatures down to −20 °C.
Colourless water-based epoxy primer that can be applied to damp surfaces and to fresh and old concrete.
Polyurethane compound for sealing pores and bonding rubber mats and underlays in sports floor systems.