QTP
QTP® 2640 (2640 F, 2640 G) — polyurethane-cement for heavy loads
Heat- and chemical-resistant polyurethane-cement for areas of extra-heavy mechanical and chemical exposure, continuously up to +130 °C.
Price on request
QTP
QTP® 1751 — fast-curing epoxy paint
This epoxy compound is used over QTP 1700 primer to produce a thin-film paint and slip-resistant finish for rapid floor repairs. Work is permitted at substrate and air temperatures from +5 °C. At +20 °C, pedestrian traffic is allowed after 3 h and full mechanical load after 4 h. Shore D hardness is 87–93; pot life is 17 minutes.
Specifications
| Manufacturer | QTP — OOO “KTP”, Noginsk |
|---|---|
| Type | epoxy floors |
| Use | production workshops, warehouses and logistics, car parks and ramps |
| Base | two-component fast-curing epoxy paint compound, solvent-free |
| Colour | tintable |
| Packaging | 20.8 kg kit: component A 16 kg (20 l pail) + component B 4.8 kg (5 l pail) |
| Application method | rapid floor repair; thin-film paint and slip-resistant finish coat (QTP 1700 primer) |
| Application temperature | substrate and air +5…+30 °C |
| Curing | at 0/+10/+20/+30 °C: pedestrian traffic after 4 / 3.5 / 3.0 / 2 h; passenger car traffic after 6 / 4 / 3 / 2.5 h; full mechanical load after 12 / 8 / 4 / 3 h; full chemical load after 4 / 3 / 2 days / 24 h |
| Key properties | compressive strength 79 MPa; flexural strength 18 MPa; tensile strength 24 MPa; Shore D hardness 87–93; Taber abrasion 57 mg; heat resistance: continuous +70 °C, up to 7 days +80 °C, up to 12 h +100 °C; pot life 17 min |
| Consumption | on concrete: QTP 1700 primer 0.25–0.35 + 1st coat 0.25–0.35 + 2nd coat 0.15–0.25 kg/m2; on anti-slip coatings: 0.75 + 0.35 kg/m2 |
| Shelf life | 12 months from the date of manufacture in unopened containers, in a dry, cool room at +15…+25 °C, protected from sub-zero temperatures and direct sunlight |
| Standards | SGR KG.11.01.09.008.E.002319.06.18 dated 19.06.2018 (epoxy enamels, TU 2312-003-28912903-2014; grade listed); test methods DIN / EN ISO / Taber |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by QTP
QTP
QTP® 1361 — clear chemical-resistant epoxy varnish
Clear solvent-free epoxy varnish for a chemical- and wear-resistant finish over epoxy coatings.
Price on request
QTP
QTP® 5061 — one-component silky matt varnish for polymer floors
Colourless moisture-curing solvent-free varnish for a wear-resistant finish coat on polymer coatings.
Price on request
QTP
QTP® 2030 AS — static-conductive polyurethane self-levelling floor
Elastic polyurethane antistatic coating with 89 % elongation, applied over QTP 3010 AS primer.
Price on request
QTP
QTP® 1051 — epoxy paint for protecting concrete floors
Two-component epoxy paint for a thin-film coating on concrete over QTP 1000 or 1010 primers in workshops and warehouses.
Price on request
QTP
QTP® 1130 — clear epoxy self-levelling compound for quartz coatings
Clear epoxy compound with a glass effect — a finish and binder for slip-resistant coatings with coloured quartz sand.
Price on request