Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
QTP® 3030 — water-reducible epoxy self-levelling floor for workshops and warehouses
QTP

QTP® 3030 — water-reducible epoxy self-levelling floor for workshops and warehouses

Epoxy floors

This self-levelling coating based on water-reducible epoxy is vapour-permeable and forms a semi-matt silky surface. Over QTP 3000 primer, it is used to produce smooth and slip-resistant floors as well as highly filled levelling layers in workshops and warehouses. Compressive strength is 78 MPa and flexural strength 38 MPa. Pot life at 20 °C is 20 minutes; foot traffic is possible after 24 h.

Specifications

ManufacturerQTP — OOO “KTP”, Noginsk
Typeepoxy floors
Useproduction workshops, warehouses and logistics
Basetwo-component pigmented water-reducible epoxy compound, solvent-free; solids content 74 %
Coloursemi-matt silky surface; colour from the QTP colour chart, tinting to RAL K
Packaging26.0 kg kit: component A 20 kg (20 l pail) + component B 6.0 kg (10 l canister)
Application methodpoured; vapour-permeable smooth and slip-resistant coatings, highly filled levelling coatings; primer — QTP 3000
Application temperaturesubstrate +10…+30 °C; air +15…+30 °C
Curingat +10/+20/+30 °C: foot traffic after 36 / 24 / 16 h; light load after 7 / 5 / 3 days; full load after 14 / 7 / 5 days
Key propertiescompressive strength 78 MPa; flexural strength 38 MPa; tensile strength 14 MPa; impact strength 37 kJ/m2; hardness 79 (DIN 53 505); Taber abrasion (DIN 53 754) 64 mg; heat resistance: continuous +65 °C, up to 7 days +85 °C, up to 12 h +100 °C; pot life at 20 °C 20 min
Layer thickness1.0–1.5 mm; 1.5–2.5 mm (example systems)
Consumptionsmooth 1.5 mm: QTP 3000 primer 0.25–0.35 kg/m2 + QTP 3030 self-levelling layer 2.18 kg/m2; 1.5–2.5 mm — QTP 3030 with quartz sand 0.1–0.4 mm (1 : 0.5 by weight)
Shelf life6 months from the date of manufacture in unopened containers, in a dry, cool room at +15…+25 °C, protected from sub-zero temperatures and direct sunlight
StandardsSGR RU.18.UTs.02.015.E.000127.06.24 dated 03.06.2024 (epoxy compounds for industrial floors, TU 20.30.22-019-28912903-2023; grade listed in the annex); test methods DIN / EN ISO / Taber

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by QTP