QTP® 2000 — colourless polyurethane primer for polyurethane systems
Low-viscosity colourless solvent-free polyurethane primer for polyurethane floors, filler coats and repair compounds.

Thixotropy allows this epoxy paint to be applied not only to floors but also to vertical concrete surfaces. It forms a thin-film protective coating or a finish coat in production and storage premises. Compressive strength is 65 MPa, hardness 88 and impact strength 38 kJ/m². The kit weighs 21.4 kg; the shelf life is 12 months.
| Manufacturer | QTP — OOO “KTP”, Noginsk |
|---|---|
| Type | epoxy floors |
| Use | production workshops, warehouses and logistics |
| Base | two-component thixotropic epoxy paint for concrete, solvent-free |
| Colour | colour from the QTP chart, tinting to RAL K |
| Packaging | 21.4 kg kit: component A 20 kg (20 l pail) + component B 1.4 kg (6 l pail) |
| Application method | thin-film protective coating on vertical and horizontal concrete; finish coat |
| Application temperature | substrate +10…+30 °C; air +15…+30 °C |
| Curing | at +10/+20/+30 °C: foot traffic after 24 / 12 / 10 h; light load after 6 / 3 / 2 days; full load after 10 / 7 / 5 days |
| Key properties | compressive strength 65 MPa; flexural strength 47 MPa; tensile strength 24 MPa; impact strength 38 kJ/m2; hardness 88; Taber abrasion <60 mg; heat resistance: continuous +50 °C, up to 7 days +80 °C, up to 12 h +100 °C |
| Consumption | on concrete: QTP 1000/1010 primer 0.25–0.35/0.3–0.5 + 1st coat 0.25–0.35 + 2nd coat 0.15–0.25 kg/m2; on anti-slip coatings: 0.75 + 0.35 kg/m2 |
| Shelf life | 12 months from the date of manufacture in unopened containers, in a dry, cool room at +15…+25 °C, protected from sub-zero temperatures and direct sunlight |
| Standards | SGR KG.11.01.09.008.E.002319.06.18 dated 19.06.2018 (epoxy enamels, TU 2312-003-28912903-2014; grade listed); test methods DIN / EN ISO / Taber |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Low-viscosity colourless solvent-free polyurethane primer for polyurethane floors, filler coats and repair compounds.
Polyurethane self-levelling compound with 90 % elongation for substrates subject to vibration, movement and cracking.
Coloured chemical-resistant epoxy enamel for thin-film protection of floors, walls and ceilings in industrial premises.
Solvent-free epoxy compound for levelling, pore sealing and making filler compounds in polymer floor systems.
Elastic polyurethane antistatic coating with 89 % elongation, applied over QTP 3010 AS primer.
One-component adhesion promoter for applying polymer floors over glazed tiles, porcelain stoneware, glass and granite.