Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
Elakor-PU Floor Sealant — polyurethane sealant for movement joints
ELAKOR

Elakor-PU Floor Sealant — polyurethane sealant for movement joints

Other floor materials

After curing, the sealant turns into an elastic rubber-like material of grey or custom colour and withstands joint movement of up to 25 %. It is used to fill wide thermal and movement joints in concrete floors, butt joints, abutments and tank joints, after placing a backer and priming the joint with “Elakor-PU” primer. Work is possible at temperatures from 0 to +30 °C, the pot life of the mix is at least 6 hours, service from −40 to +70 °C, including outdoors.

Specifications

ManufacturerElakor — OOO “TEOKHIM-PROM”, Moscow Region
Typefloor material
Usecar parks and ramps, outdoor areas, chemically resistant, wet rooms
Basetwo-component polyurethane sealant; composition: urethane prepolymers, hardener, fillers, functional additives
Colourbase colour – grey (approx. RAL7040), other colours – to order; after curing – an elastic rubber-like material of the specified colour; semi-gloss finish
PackagingComp. “A” 21.6 kg + Comp. “B” 2.4 kg = Kit 24 kg
Application methodSealing of wide thermal and movement joints in concrete floors; butt joints, abutments, joints in tanks and structures. Procedure: chamfering the joint edges at 45° (V-shape), cleaning, dust removal; backer (elastic PU mounting foam) to a depth 1.5 times the joint width; priming the joint with “Elakor-PU” Grunt until glossy; filling with sealant. Surfaces: concrete, sand-cement, brick, slate, wood, metal (cleaned and primed with “Elakor-PU” primers). Surface moisture not more than 4 wt%, relative air humidity not more than 80%.
Application temperatureair and surface: from 0°C to +30°C; material from +15°C to +25°C
Curingpot life after mixing at least 6 h; drying before applying coatings or abrasive treatment – 12-16 h
Key propertiesA:B ratio by weight 9:1; mix density 1.45 kg/l; application temperature 0..+30°C; nominal tensile strength at least 0.4 MPa; relative elongation at break (dumbbell specimens) at least 400%; maximum joint movement 25%; service temperature from -40 to +70°C; fire hazard class KM2; chemical resistance: water, salt and alkali solutions of any concentration, acid solutions up to 10-20%, oils and fats of all kinds, organic solvents, petrol, diesel fuel
Layer thicknessjoint filling depth: for loaded surfaces – 1.5 times the joint width; for non-loaded surfaces – at least the joint width; chamfer 10 mm
Consumptionper 1 linear m: M = B x H x 1.45/1000 + 0.15 kg (B – width, H – joint depth, mm; 0.15 kg – for the chamfers); example: joint 30 mm × 45 mm – 2.1 kg/linear m
Shelf life8 months in the manufacturer's original packaging; store and transport at temperatures from 0°C to +30°C
StandardsCertificate of conformity (fire safety) “Elakor-PU 2K”; ROSTEST letter “Elakor-PU 2K”; MOSGOSEKSPERTIZA letter on the use of “Elakor-PU 2K” at garage facilities

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by ELAKOR