Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
Elakor-PTs T4 Paint — polyurethane-cement floor paint
ELAKOR

Elakor-PTs T4 Paint — polyurethane-cement floor paint

Polyurethane-cement floors

The polyurethane-cement paint is poured onto the substrate, spread with squeegees and back-rolled with rollers to obtain a thin-layer coating in two coats. It also serves as the finishing coat of rough anti-slip floors with quartz sand. The primer is Elakor-PTs Grunt or Elakor-ED Grunt-2K/100P, the concrete must be at least M350; grey, light grey, beige, brown, yellow, blue, green and black colours are available, fire hazard class KM2.

Specifications

ManufacturerElakor — OOO “TEOKHIM-PROM”, Moscow Region
Typepolyurethane-cement floors
Useproduction workshops, warehouses and logistics, car parks and ramps, food and pharmaceutical, chemically resistant
Basepolyurethane-cement enamel (paint), three-component pigmented compound
Colourgrey, light grey, beige, brown, yellow, blue, green, black; semi-matt/matt finish
PackagingComp. “A” 9 kg + Comp. “B” 6.5 kg + Comp. “C” 14.5 kg = Kit 30 kg
Application methodThin-layer PTs coatings (including with quartz) and the finishing coat of rough (anti-slip) PTs floors with quartz sand. Substrate: concrete/screeds not lower than M350 (B25), cured for at least 28 days; primer Elakor-PTs Grunt (drying at least 24 h at +20°C) or Elakor-ED Grunt-2K/100P. Pour, spread with squeegees, back-roll with rollers; thin-layer coating – 2 coats.
Application temperatureair, surface: optimum +17…+23°C; permissible +10…+30°C; material temperature +18…+22°C
Curingpot life on the surface at (20±2)°C at least 15 min
Key propertiesA:B:C ratio by weight 9.0 : 6.5 : 14.5; density 1.47 ± 0.02 kg/l; adhesion (GOST 28574-2014) to concrete B25 > 2.5 MPa, to concrete B40 > 4.0 MPa (failure in concrete); compressive strength (28 days) 48 MPa; tensile 4 MPa; fire hazard class KM2 (V2, D1, T1, RP1); chemical resistance: water, salt and alkali solutions of any concentration, acid solutions up to 10-20%, oils and fats of all kinds, organic solvents, petrol, diesel fuel
Consumptionthin-layer coating: 2 coats at 400 g/m² per coat; sealing of rough coatings: from 0.2 to 1.5 kg/m² depending on the filler fraction and the required roughness
Shelf lifecomponents “A” and “B” – 12 months, component “C” – 6 months in the manufacturer's original packaging; store and transport at temperatures from +5° to +25°C
StandardsCertificate of conformity (fire safety) “Elakor-PTs”, class KM2; Certificate of conformity “Elakor-PTs”

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by ELAKOR