Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
Elakor-PU Lyuks Emal Antistatic (AST-7, AST-6) — lightfast antistatic paint
ELAKOR

Elakor-PU Lyuks Emal Antistatic (AST-7, AST-6) — lightfast antistatic paint

Polyurethane floors

This acrylic-urethane polyurethane enamel combines antistatic properties with UV resistance: lightfastness per ISO 9370-2017 is 7 (“excellent”), gloss 90–98 %. It is used to renovate existing antistatic coatings and self-levelling floors and to apply an antistatic layer over anti-corrosion and fire-retardant coatings. According to the technical data sheet, the enamel is used in clean and sterile rooms, server rooms, laboratories, food plants and production of explosive substances; specific surface resistance is less than 10⁹ Ω, fire hazard class KM1.

Specifications

ManufacturerElakor — OOO “TEOKHIM-PROM”, Moscow Region
Typepolyurethane floors
Useproduction workshops, warehouses and logistics, food and pharmaceutical, outdoor areas, chemically resistant, antistatic/conductive
Baseantistatic electrically conductive two-component polyurethane paint, weather-resistant, lightfast, UV-resistant; acrylic-urethane prepolymers, organic solvents, pigments, functional additives
Colourbase RAL7040 (medium grey), others per “RAL K7 Classic”; gloss finish; surface – light texture
Packaging“A” + “B” = kit 15 kg + 3 kg = 18 kg; mixing in the pail of comp. “A”
Application methodAntistatic coatings for floors, walls, ceilings, structures; renovation of existing antistatic coatings and self-levelling floors; antistatic layer over anti-corrosion and fire-retardant coatings. Substrates – any building materials (concrete, plaster, brick, stone, wood, metal, polymers) prepared with “Elakor” materials. Rollers (12-14 mm nap), brushes; airless spraying (without thinner); air spraying (up to 5% xylene or solvent); 1-3 coats. Relative air humidity not more than 80%; surface moisture not more than 4 wt%; 3°C above the dew point.
Application temperatureair and surface: from +5°C to +25°C; material: from +15°C to +22°C
Curingpot life at +20°C at least 40 min; drying to degree 3 at +20°C, relative air humidity 65% not more than 1 h; drying between coats at +15…25°C: by roller 8-12 h (not more than 24 h), by airless spraying 1-2 h (not more than 24 h); after application at +15…25°C: foot traffic – 3 days, full mechanical load – 7 days, full chemical load – 14 days
Key propertiesA:B ratio by weight 5:1; mix viscosity VZ-4 20-25 s; solids content at least 54%; density 1.07±0.01 kg/l; service temperatures at relative air humidity up to 80% from -60°C to +100°C, at relative air humidity above 80% from -40°C to +80°C; water absorption not more than 0.1%; Rs AST-7, AST-6 less than 10^9 Ω (GOST IEC 61340-4-1-2017); Rg with an antistatic layer thickness of not more than 1.5 mm: AST-7 (V=100 V) 5x10^5-10^7 Ω, AST-6 (V=10 V) 5x10^5-10^6 Ω; film tensile strength at least 27 MPa; elongation at least 20%; impact (U-2M) direct 100 cm, reverse 50 cm; Shore D at 28 days 70-75; flexibility not more than 2 mm; gloss at 60° 90-98%; lightfastness 7 (excellent) per ISO 9370-2017; Taber abrasion CS-10, 1000 g, 28 days – 22 mg; fire hazard class KM1; chemical resistance: water, salt and alkali solutions of any concentration, acid solutions up to 10-20%, oils and fats of all kinds, organic solvents, petrol, diesel fuel
Consumption1-3 coats, 110-150 g/m² per coat (depends on the surface and application method)
Shelf life6 months in the manufacturer's original packaging; store and transport at temperatures from +5°C to +25°C

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by ELAKOR