The acrylic varnish is supplied as a concentrate that is diluted with water one to one before use, and it contains no organic solvents. It is used to dust-proof concrete and sand-concrete screeds under parquet, laminate, linoleum and raised floors, to seal the surface after fluating or water-repellent treatment, and to prime the substrate under coloured acrylic coatings. The film is transparent, vapour-permeable and UV-resistant; new concrete can be treated after 3 days, substrate moisture not more than 7 %, temperature not lower than +5 °C.
| Manufacturer | Elakor — OOO “TEOKHIM-PROM”, Moscow Region |
|---|---|
| Type | varnishes and topcoats |
| Use | outdoor areas, decorative |
| Base | one-component water-based acrylic varnish (concentrate, diluted with water 1:1); without organic solvents, odourless |
| Colour | transparent film, UV-resistant |
| Packaging | plastic canister 30 kg |
| Application method | Protective and decorative acrylic impregnation; priming under coloured acrylic coatings; sealing after fluating or water-repellent treatment; dust-proofing of concrete and sand-concrete screeds (under parquet, laminate, linoleum, raised floors). New (after 3 days of hardening) and old concrete substrates; substrate moisture not more than 7 wt%. Dilute before use: 1 litre of water per 1 litre of concentrate. |
| Application temperature | air and substrate: at least +5°C |
| Key properties | film vapour-permeable, fully transparent, UV-resistant |
| Consumption | B17.5 (M200) – 0.3-0.4 kg/m² for two coats; B22.5 (M300) – 0.2-0.3 kg/m² for one or two coats; B25.0 (M350) – 0.15-0.2 kg/m² for one coat |
| Shelf life | 12 months in the manufacturer's original packaging; store and transport at temperatures from 0°C to 30°C |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Professional version of the one-component polyurethane primer: impregnation and priming of concrete under polyurethane coatings at temperatures down to −30 °C.
Non-sparking antistatic polyurethane-cement self-levelling floor with specified electrical resistance for electronics, laboratories and explosion-hazard warehouses.
Water-dispersion acrylic paint concentrate for floors with light loads and for walls and ceilings of warehouses, hangars and workshops.
Hard-elastic impact-resistant polyurethane self-levelling floor with uniform colour, compressive strength 61 MPa.
Unpigmented non-shrink epoxy filler for levelling the substrate under transparent and coloured epoxy coatings.
Weather-resistant antistatic polyurethane paint for floors, walls and structures, including outdoors.
