Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
Elakor-ED Shpatlevka-2K BP — unpigmented epoxy filler
ELAKOR

Elakor-ED Shpatlevka-2K BP — unpigmented epoxy filler

Concrete floor repair

Without pigment, the filler keeps its natural colour close to RAL 1013, so it is used under transparent and coloured coatings. This compound of two components mixed 8:1 by weight does not shrink, fills cavities, potholes, cracks and joints, and is also suitable for abutments and skirtings. It is applied with flat trowels neat or with dry sand onto concrete, sand concrete, tile, stone and brick at temperatures from +5 to +25 °C.

Specifications

ManufacturerElakor — OOO “TEOKHIM-PROM”, Moscow Region
Typeconcrete floor repair
Useproduction workshops, warehouses and logistics, car parks and ramps, retail and public premises, wet rooms
Basetwo-component unpigmented epoxy filler; composition: epoxy resin, hardener, functional additives
Colourunpigmented; natural colour – approx. RAL1013
Packaging“A” + “B” = Kit 25.6 kg + 3.2 kg = 28.8 kg
Application methodFilling of cavities, potholes, cracks, expansion joints; “smoothing” of the surface under epoxy floors; abutments, skirtings, joints. Substrates: concrete, sand concrete, terrazzo, tile, levelling compounds, stone, brick. Surface moisture not more than 4 wt%, relative air humidity not more than 80%, surface temperature 3°C above the dew point; on the lowest floors – waterproofing against rising damp; preparation – removal of laitance/weak layer by grinding or shot blasting. Flat trowels; “neat” or with dry sand (fraction 0.1-0.4 mm): by volume 0.5-1.0 part sand to 1 part filler for smoothing, 2-4 parts for filling defects. Working time not more than 30 minutes.
Application temperatureair and surface: from +5°C to +25°C; material: from +10°C to +20°C
Curingpot life at 20.0±2.0 °C at least 30 min; drying to degree 3 not more than 8 h
Key propertiesA:B ratio by weight 8 : 1 (may vary); non-volatiles at least 99%; mix density 1.60±0.05 kg/l; adhesion to glass not more than 1 point; film resistance to static exposure to water at least 48 h, xylene at least 48 h, butyl acetate at least 24 h (at (20±2)°C); fire hazard class of Elakor-ED fillers KM2; chemical resistance: water, salt and alkali solutions of any concentration, acid solutions up to 10-20%, oils and fats of all kinds, organic solvents, petrol, diesel fuel
Layer thicknessper coat: “neat” filler – not more than 3 mm; with sand (weight ratio 1:1 and more) – not more than 5 mm
Shelf lifestore and transport at temperatures from 0° to +25°C
StandardsFire safety certificate “Elakor-ED”; ROSTEST letter “Elakor-ED”

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by ELAKOR