Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
Teksipol “3 in 1” Ekspert — primer-enamel for concrete, applied down to −30 °C
KRASKO

Teksipol “3 in 1” Ekspert — primer-enamel for concrete, applied down to −30 °C

Other floor materials

One material replaces three — impregnation, primer and finish coat: the compound strengthens and dustproofs the substrate and at the same time forms a semi-matt water-repellent film with UV filters. It is applied in two coats at temperatures down to −30 °C; recoat drying at 20 °C takes about 30 min. Once cured, the coating performs from −30 to +200 °C, so it suits boiler houses and boiler rooms, car parks, car washes and open areas.

Specifications

ManufacturerKRASKO — OOO “NPO KRASKO”, Moscow Region
Typefloor material
Useproduction halls, warehouses and logistics, car parks and ramps, outdoor areas, retail and public
BaseOne-component primer-enamel on siliconised resin with functional active components and UV filters
ColourSemi-matt; RAL 7040
Packaging20 kg
Application methodNew and old cement screeds and concrete of at least M250, indoors and outdoors. Substrate: compressive strength at least 20 MPa, pull-off strength at least 1.5 MPa, moisture not more than 4 %; relative air humidity 60–80 %; grinding. Ready to use (xylene if necessary, not more than 3–5 %); 2 coats by brush, roller for rough surfaces or air spraying; recoat drying 30 min (but not more than one day) at 20 °C, at low temperatures — up to 2 h.
Application temperaturenot below −30 °C (make sure there is no frost on the substrate)
CuringDrying to degree 3 at 20 °C — not more than 30 min; light foot traffic — after 12 h; final strength development — 3 days
Key propertiesSolids 45–58 %; conventional viscosity by VZ-246 cup (nozzle 6) 25–70 s; hiding power not more than 250 g/m²; TML hardness at least 0.4; adhesive strength at least 1 MPa; service temperature range after curing from −30 to +200 °C
Consumption0.2–0.25 kg/m² (theoretical)
Shelf life9 months from the date of manufacture; storage from −30 °C to +50 °C
StandardsTU 20.30.12-003-01524656-2017; state registration certificate; preparation to SP 29.13330.2011 and SP 71.13330.2017

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by KRASKO