Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
Tistrom 2 AQUA — matt water-polyurethane floor varnish
KRASKO

Tistrom 2 AQUA — matt water-polyurethane floor varnish

Sealers and topcoats

The varnish covers epoxy and polyurethane self-levelling floors such as Epolast and Polimerstoun-2, as well as decorative coatings with flakes. It does not yellow in the sun, gives gloss surfaces an anti-slip effect and withstands industrial detergents, fuels and lubricants and oils. There is no pungent odour, so work proceeds without stopping production; water resistance is at least 240 h, final strength after 5 days.

Specifications

ManufacturerKRASKO — OOO “NPO KRASKO”, Moscow Region
Typesealers and finish coats
Useproduction halls, warehouses and logistics, car parks and ramps, chemically resistant, outdoor areas, retail and public, decorative
BaseTwo-component water-polyurethane varnish: modified water-polyurethane resin with active components and UV-resistant pigments
ColourMatt (gloss at 60° 4–18 GU; the advantages in the description say “semi-matt”), clear
Packaging20 kg
Application methodFinish sealing coat over epoxy and polyurethane self-levelling floors (Epolast, Polimerstoun-2), thin-layer and decorative polymer coatings, incl. with flakes (chips). Substrate: compressive strength at least 20 MPa, pull-off strength at least 1.5 MPa, moisture not more than 4 %. Brush/roller — 2 coats with recoat drying 1 h at (20±2) °C; air spraying (nozzle 1.7–2.5 mm, 3–5 bar) without thinners, 2 coats; pot life at least 1 h; cleaning — water, xylene, R-Universal.
Application temperaturefrom +10 °C to +30 °C
CuringDrying to degree 3 at 20 °C — not more than 2 h; gentle foot traffic — not more than 12 h; final strength development — 5 days
Key propertiesNon-volatile content by weight comp. A 28–32 %, comp. B 98–100 %; conventional viscosity by VZ-246 cup (nozzle 4) 15–25 s; gloss at 60° 4–18 GU; film impact strength at least 50 cm; hardness by TML-A at least 0.35; resistance (description): 10 % NaOH at least 24 h, mineral oils more than 72 h, water at least 240 h; resistance: 3 % NaCl more than 48 h, petrol at least 480 h, oils more than 720 h, water at least 72 h
Consumption100–200 g/m² (description); 120–140 g/m²
Shelf life12 months from the date of manufacture; storage from +5 °C to +35 °C
StandardsTU 20.30.11-041-01524656-2020; preparation to SP 29.13330.2011 and SP 71.13330.2017

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by KRASKO