Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
WETISOL Ecto SF — hydraulic plug for stopping leaks
Wetisol (INGRI)

WETISOL Ecto SF — hydraulic plug for stopping leaks

Hydraulic plugs

An active leak in concrete, brick masonry or natural stone is stopped with the WETISOL Ecto SF hydraulic plug even under a constant water inflow. The one-component chloride-free cement mix starts to harden after 1–2 min, reaches a compressive strength of at least 15 MPa after 1 h and 45 MPa by 28 days. It is also used to seal leaking joints and cracks, fill formwork tie holes and quickly fix bolts, anchors, injection packers and pipes. The compound is not intended for expansion joints and moving cracks; packaging — 1 and 15 kg buckets.

Specifications

ManufacturerWetisol (INGRI) — OOO “Ingri”
Typehydraulic plugs
Useleak repair, joints and abutments
Baseone-component rapid-hardening dry mix on a cement binder; contains no chlorides
Packagingpolyethylene buckets, net 1 kg and 15 kg
Application methodrapid elimination of active leaks in concrete, brick masonry and natural stone, incl. under a constant water inflow; sealing of leaking joints and cracks; filling of holes from climbing formwork; interior and exterior works; widen the leak point with a rotary hammer or by hand at an angle of 45° to a depth of at least 3 cm, remove weakened concrete; water ~0.2 l per 1 kg, quickly mix with a spatula to a viscous dense mass, shape it in rubber gloves, after the start of setting press it firmly against the leak for about 2 min, release the pressure smoothly, without twisting movements, remove the excess; prepare strictly for one hole at a time, large defects — in several stages; do not apply to frozen substrates; not for expansion joints and moving cracks; do not re-mix
Application temperatureambient air and substrate +5…+30 °C; in cold weather (+5 °C) — warmed water 30–40 °C, in hot weather — chilled water 5–10 °C; recommended temperature of material and water 15–25 °C
Curingpot life of the mortar mix 1–2 min; start of hardening 1–2 min
Key propertiescompressive strength at least 15 MPa after 1 h, 25 MPa after 1 day, 30 MPa after 7 days, 45 MPa after 28 days (GOST 310.4); flexural strength at least 2.5 MPa after 1 h and 6.5 MPa after 28 days (GOST 310.4); blocks leaks under a constant water inflow; contains no chlorides, does not cause corrosion of steel; service temperature from −40 to +60 °C
Consumptionabout 1.7 kg of dry mix per 1 dm³ of hole
Shelf life6 months from the date of manufacture in undamaged manufacturer's packaging in covered dry rooms with air humidity max 60%
StandardsTU 23.64.10-061-94613022-2017; transport and storage per GOST 31357-2007; fire safety — not subject to mandatory certification

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by Wetisol (INGRI)

Wetisol (INGRI)

Wetisol I-212 — methacrylate injection gel

Acrylic gel for injection into joints, cracks and behind the structure; swells by more than 25% on contact with water, gel time is adjustable.

Price on request
Wetisol (INGRI)

Wetisol Spray 400 — hot-spray polyurea

Sprayed polyurea for foundations, tanks, roofs and bridges: a seamless membrane with 350–450% elongation, working from −60 to +90 °C.

Price on request